GEHL VT320 Track Loaders
Rated Operating Capacity at 35% Tipping Load (kg):
1,650 lbs. (748)
Gross Power (kW):
68.4 hp (51.0)
Lift Height (mm):
119" (3038)
Product Feature
The Gehl VT320 Compact Track Loader was designed from the ground up to be the top performing machine on the jobsite.
- Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
- Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
- Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
- Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
The robust lift-arm on the VT320 Compact Track Loader is designed for optimal strength, visibility and capacity.
- Additional reach and increased dump height result in more efficient load placement and overall performance.
- Low-profile design provides outstanding forward, rear and side visibility.
- Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
- Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
- Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Serviceability is very important to our customers. The Gehl VT320 is sure to exceed your service expectations.
- Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
- Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
- Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
- Track rollers and idlers are sealed and require no maintenance.
- Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
- Coded wiring takes the guesswork out of electrical system identification.
Product Parameter
| Height to Hinge Pin - Fully Raised (mm) | 130" (3302) |
| Operating Capacity at 35% Tipping Load with Optional Counterweight (kg) | 3,200 lbs. (1452) |
| Ground Speed - Standard 2-Speed (km/hr) | 7.8 mph (12..6) |
| Make/Model | Deutz / TD 3.6 EPA Final Tier IV |
| Type | 4-Stroke Turbo |
| Displacement/Cylinders (L) | 221 cu.in. (3.6)/4 |
| Gross Power (kW) | 114 hp (85 kW) |
| Net Power (kW) | 108 hp (80.8 kW) |
| Peak Torque (Nm) | 339 ft.-lbs. (430 Nm) |
| Oil Pump Capacity (L) | 9 qts. (8.5) |
| Alternator Voltage/Amperage | 14V/95A |
| Auxiliary Hydraulic Flow - Rated Speed (L/min) | 27 gpm (102.2) |
| Hight-Flow Hydraulic Flow - Rated Speed (L/min) | 37.4 gpm (141.6) |
| Height to Hinge Pin - Fully Raised (mm) | 130" (3302) |
Dimensions |
|
|---|---|
| A Overall Operating Height - Fully Raised | 169" |
| B Height to Hinge Pin - Fully Raised | 130.0" |
| C Reach - Fully Raised | 40.4" |
| D Dump Angle - Fully Raised | 41° |
| E Dump Height - Fully Raised | 99.6" |
| F Maximum Rollback Angle - Fully Raised | 90° |
| G Overall Height at ROPS | 83.1" |
| H Overall Length with Bucket - Standard Counterweight | 159.8" |
| I Overall Length without Bucket - Standard Counterweight | 127.7" |
| J Specified Height | 76.3" |
| K Reach at Specified Height | 29.6" |
| L Dump Angle at Specified Height | 67.6° |
| M Maximum Rollback Angle at Ground | 31° |
| N Carry Position | 7.8" |
| O Maximum Rollback Angle at Carry Position | 31° |
| P Digging Position - Below Ground | +0.74" |
| Q Angle of Departure with Standard Counterweight | 24° |
| R Ground Clearance | 12.2" |
| S Track Gauge | 51.7" |
| T Track Shoe Width | 17.7" |
| U Crawler Base | 61.8" |
| V Overall Width - Less Bucket | 69.5" |
| W Bucket Width | 83.9" |
| X Clearance Radius - Front With Bucket | 96.1" |
| Z Clearance Radius - Rear with Standard Counterweight | 73.6" |
| Maximum Rollback at Specified Height | 64.5° |
| Angle of Approach | 90° |
| Grouser Height | 1" |
Capacity |
|
| Operating Capacity at 35% Tipping Load | 3,200 lbs. |
| Operating Capacity at 50% Tipping Load | 4,571 lbs. |
| Tipping Load | 9,143 lbs. |
| Operating Weight | 11,610 lbs. |
Engine |
|
| Make/Model | Deutz/TD 3.6 EPA Final Tier 4 |
| Type | 4-Stroke Turbo |
| Displacement/Cylinders | 221 cu.in./4 |
| Gross Power @ rpm | 114 hp @ 2300 |
| Net Power @ rpm | 108 hp @ 2300 |
| Peak Torque @ rpm | 339 ft.-lbs. @ 1600 |
| Oil Pump Capacity | 9 qts. |
| Alternator Voltage/Amperage | 14V/95A |
Track Drives |
|
| Drawbar Pull/Tractive Effort | 12,770 lbs. |
| Track Type/Track Rollers/Roller Type | Rubber/5/Steel |
| Track Width | 17.7" |
| Ground Pressure | 5.3 psi |
Forces |
|
| Bucket Breakout - Tilt Cylinder | 9,901 lbs. |
| Bucket Breakout - Lift Cylinder | 7,491 lbs. |
| Ground Speed - Single Speed | 5.3 mph |
| Ground Speed - Two Speed | 7.8 mph |
Volume |
|
| Fuel Tank | 32.5 gal. |
| Hydraulic Reservior Tank | 9.9 gal. |
| Coolant Capacity | 5.1 gal. |
Hydraulics |
|
| Auxiliary Hydraulic Flow - Rated Speed | 27 gpm |
| High-Flow Hydraulic Flow - Rated Speed | 37.4 gpm |
| Transmission Pump Type | Axial Piston |
| Motor Type | Radial Piston w/ Planetary Gear |
Electronic System |
|
| Battery Volts | 12V |
| Cold Cranking Amps at Temperature | 950 CCA @ 0°F |
Dimensions |
|
|---|---|
| A Overall Operating Height - Fully Raised | 4293 mm |
| B Height to Hinge Pin - Fully Raised | 3302 mm |
| C Reach - Fully Raised | 1036 mm |
| D Dump Angle - Fully Raised | 41° |
| E Dump Height - Fully Raised | 2530 mm |
| F Maximum Rollback Angle - Fully Raised | 90° |
| G Overall Height at ROPS | 2111 mm |
| H Overall Length with Bucket - Standard Counterweight | 4059 mm |
| I Overall Length without Bucket - Standard Counterweight | 3243 mm |
| J Specified Height | 1939 mm |
| K Reach at Specified Height | 751 mm |
| L Dump Angle at Specified Height | 68° |
| M Maximum Rollback Angle at Ground | 31° |
| N Carry Position | 199 mm |
| O Maximum Rollback Angle at Carry Position | 31° |
| P Digging Position - Below Ground | 19 mm |
| Q Angle of Departure with Standard Counterweight | 23.5° |
| R Ground Clearance | 309 mm |
| S Track Gauge | 1313 mm |
| T Track Shoe Width | 450 mm |
| U Crawler Base | 1570 mm |
| V Overall Width - Less Bucket | 1766 mm |
| W Bucket Width | 2131 mm |
| X Clearance Radius - Front With Bucket | 2442 mm |
| Z Clearance Radius - Rear with Standard Counterweight | 1870 mm |
| Maximum Rollback at Specified Height | 64.5° |
| Angle of Approach | 90° |
| Grouser Height | 25.4 mm |
Capacity |
|
| Operating Capacity at 35% Tipping Load | 1452 kg |
| Operating Capacity at 50% Tipping Load | 2074 kg |
| Tipping Load | 4148 kg |
| Operating Weight | 5267 kg |
Engine |
|
| Make/Model | Deutz/TD 3.6 EPA Final Tier IV |
| Type | 4-Stroke Turbo |
| Displacement/Cylinders | 3.6 L/4 |
| Gross Power @ rpm | 85 kW @ 2300 |
| Net Power @ rpm | 80.8 kW @ 2300 |
| Peak Torque @ rpm | 460 Nm @ 1600 |
| Oil Pump Capacity | 9 L |
| Alternator Voltage/Amperage | 14V/95A |
Track Drives |
|
| Drawbar Pull/Tractive Effort | 5792 kg |
| Track Type/Track Rollers/Roller Type | Rubber/5/Steel |
| Track Width | 450 mm |
| Ground Pressure | 0.37 bar |
Forces |
|
| Bucket Breakout - Tilt Cylinder | 4492 kg |
| Bucket Breakout - Lift Cylinder | 3398 kg |
| Ground Speed - Single Speed | 8.6 km/hr |
| Ground Speed - Two Speed | 12.6 km/hr |
Volume |
|
| Fuel Tank | 123 L |
| Hydraulic Reservior Tank | 38 L |
| Coolant Capacity | 19.3 L |
Hydraulics |
|
| Auxiliary Hydraulic Flow - Rated Speed | 102.2 L/min |
| High-Flow Hydraulic Flow - Rated Speed | 141.6 L/min |
| Transmission Pump Type | Axial Piston |
| Motor Type | Radial Piston w/ Planetary Gear |
Electronic System |
|
| Battery Volts | 12V |
| Cold Cranking Amps at Temperature | 950 CCA @ -18°C |
Performance |
|
|---|---|
| All-Tach® Mounting System | Standard |
| IdealTrax™ | Exclusive Standard |
| Power-A-Tach® Mounting System | Optional |
| Selectable Self-Leveling Hydraulic Lift Action | Optional |
| Two-Speed Drive | Standard |
| 12-Volt Battery | Standard |
Engine |
|
| Engine Alert System with Error Display | Standard |
| Glowplug Starter Assist | Standard |
| Dual-Element Air Cleaner with Indicator | Standard |
Hydraulic System |
|
| Auxiliary Hydraulics | Standard |
| High-Flow Auxiliary Hydraulics | Optional |
Undercarriage |
|
| Elevated Planetary Final Drives | Standard |
| Maintenance Free Rollers Each Side | 4 |
| Single Flange Front/Dual Flange Rear Idlers | Standard |
| Rubber Track Undercarriage System | Standard |
| Dedicated Undercarriage | Standard |
Structure |
|
| Tilt-out Foot Pod | Standard |
| Back-up Alarm | Standard |
| Combination Radiator & Hydraulic Oil Cooler | Standard |
| ROPS/FOPS Level II Overhead Guard | Standard |
| Anti-Vandalism Lock Provisions | Standard |
| Mechanical Lift Cylinder Lock | Standard |
Operator's Station |
|
| Pressurized Cab Enclosure with A/C | Optional |
| Fold-Up Door | Optional |
| Multi-Function Function Display Screen | Standard |
| Electronic Attachment Control - 14-Pin Connector | Optional |
| Foot Throttle | Standard |
| Full-Suspension Seat | Standard |
| Air Suspension Seat | Optional |
