GEHL V420 Skid Loaders
Height to Hinge Pin - Fully Raised (mm):
108.1" (2746)
Rated Operating Capacity (kg):
1,050 lbs. (476)
Net Power (kW):
33.1 hp (24.7)
Product Feature
Controls on the Gehl V420 skid loader are ergonomically designed to reduce operator fatigue and increase productivity.
- Adjustable joystick handles provide ease of operator control with minimal effort, reducing fatigue.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Infinitely adjustable proportional auxiliary hydraulics.
- Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.
The Gehl V420 skid loader comes equipped with the power to tackle virtually any job.
- Hydraulic fan with swing-out cooler reduces fuel consumption, reduces noise levels, and provides improved service access.
- Automatic grid heater engine intake heating system provides superior cold-weather starting.
- Engine has conventional water/ethylene glycol liquid-cooled design.
- Engine servicing points are readily accessible.
- Dual element filter and pre cleaner are standard.
The V420 skid loader vertical-lift arm design was created for maximum reach, superior strength and optimal operator visibility.
- Low-profile lift arm design provides outstanding forward and side visibility.
- Single-plane lift arm design features a heavy-duty timing link, upper-rear channel support and large diameter pivot pins, providing best-in-class vertical and lateral strength and rigidity, as well as exceptional rear visibility.
- Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
At Gehl we know ease of serviceability is very important to our customers. The model V420 skid loader is sure to exceed their expectations.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
- Swing-out cooler provides improved access to engine bay area.
- Entire cabin structure tilts rearward with a gas strut/spring for easy internal service access.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- Coded wiring takes the guesswork out of electrical system identification.
- Cabin filter is located on the top of the operator structure allowing it to pull more clean, fresh air and less debris.
- Rear side panels can be removed with the lift arm in the raised or lowered position.
- Hydraulic tank dipstick allows for simple and fast hydraulic fluid checks.
- Check engine coolant quickly through the handy sight gauge.
Product Parameter
Height to Hinge Pin - Fully Raised (mm) | 144" (3653) |
Travel Speed with Standard Two-Speed (km/hr) | 10.7 mph (17.3) |
A | Augers |
B | Bulk Material Buckets |
C | Cold Planers |
D | Silage Defacer |
E | Snow Removal |
F | Stump Removal Bucket |
G | Tree Shears |
H | Tree Puller/Grabbing Tool |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 186.8" |
B Height to Hinge Pin - Fully Raised | 144" |
C Overall Height to Top of ROPS | 82.0" |
D Ground Clearance to Chassis | 7.3" |
E Overall Length with Bucket | 158.5" |
F Overall Length without Bucket | 121.5" |
G Wheelbase | 54.6" |
H Dump Reach - Fully Raised | 39.5" |
I Rollback at Ground | 31° |
J Dump Angle | 31° |
K Overall Width | 79.5" |
L Bucket Width | 84" |
M Clearance Circle - Rear | 70.5" |
N Clearance Circle - Front without Bucket | 50.8" |
O Clearance Circle - Front with Bucket | 88.5" |
P Seat to Ground Height | 41.2" |
Q Rollback at Specified Height | 100° |
R Dump Height | 114.8" |
S Departure Angle | 19° |
Standard Specification Tire Size | 14.00 - 17.5 HD |
Engine |
|
Make | Deutz |
Model | TCD 3.6 Tier IV |
Gross Power @ rpm | 120 hp @ 2,200 |
Displacement | 220 cu.in. |
Maximum Torque @ rpm | 354 ft.-lbs. @ 1,600 |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 32 gpm |
High-Flow Auxiliary Hydraulics - Option | 40.8 gpm |
Reservoir Capacity | 16.75 gal. |
Capacities/Weights |
|
Rated Operating CapacityA | 4,200 lbs. |
Fuel Tank | 40 gal. |
Travel Speed - Maximum | 10.7 mph |
UREA/DEF Tank | 4.0 gal. |
Operating WeightC - Approximate | 11,665 lbs. |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 4745 mm |
B Height to Hinge Pin - Fully Raised | 3653 mm |
C Overall Height to Top of ROPS | 2083 mm |
D Ground Clearance to Chassis | 185 mm |
E Overall Length with Bucket | 4026 mm |
F Overall Length without Bucket | 3086 mm |
G Wheelbase | 1387 mm |
H Dump Reach - Fully Raised | 1003 mm |
I Rollback at Ground | 31° |
J Dump Angle | 31° |
K Overall Width | 2019 mm |
L Bucket Width | 2134 mm |
M Clearance Circle - Rear | 1791 mm |
N Clearance Circle - Front without Bucket | 1290 mm |
O Clearance Circle - Front with Bucket | 2248 mm |
P Seat to Ground Height | 1046 mm |
Q Rollback at Specified Height | 100° |
R Dump Height | 2916 mm |
S Departure Angle | 19° |
Standard Specification Tire Size | 14.00 - 17.5 HD |
Engine |
|
Make | Deutz |
Model | TCD 3.6 Tier IV |
Gross Power @ rpm | 89.5 kW @ 2200 |
Displacement | 3.6 L |
Maximum Torque @ rpm | 480 Nm @ 1600 |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 121 L/min |
High-Flow Auxiliary Hydraulics - Option | 185.5 L/min |
Reservoir Capacity | 63.4 L |
Capacities/Weights |
|
Rated Operating CapacityA | 1905 kg |
Fuel Tank | 152 L |
Travel Speed - Maximum | 17.3 km/hr |
UREA/DEF Tank | 15.2 L |
Operating WeightC - Approximate | 5291 kg |
Control Patterns |
|
---|---|
Gehl T-Bar Controls - Servo | Optional |
Hand/Foot Controls - Pilot | Optional |
Joystick Controls - Pilot | Standard |
Dual-Hand Controls Available | |
Engine |
|
Engine Auto-Shutdown System | Standard |
Engine Pre Heater | Standard |
Turbo-charged Engine | Standard |
Hydraulics |
|
Auxiliary Hydraulics | Standard |
High-Flow Auxiliary Hydraulics | Optional |
Independent Hydraulic Reservoir | |
Operator Station |
|
Adjustable Arm Rests/Control Towers | Standard |
Air-Conditioning | Optional |
Air Ride Seat | Optional |
Cab Enclosure | Optional |
Foot and Hand Throttles | Standard |
Full Instrumentation | Standard |
Heating | Optional |
Horn | Standard |
Integral Access Plate (Removable) | Standard |
Operator Restraint Bar | Standard |
ROPS/FOPS Level II Overhead Guard | Standard |
Sound Reduction Material | Standard |
Suspension Seat - Mechanical | Standard |
Work Lights - Front and Rear | Standard |
Performance |
|
All-Tach® Attachment Mounting System | Standard |
Power-A-Tach® Attachment Mounting System | Optional |
Anti-Vandalism Protection | Standard |
Back-Up Alarm | Optional |
Brake Control (Auto/Manual)/td> | Standard |
Counterweight | |
Hydraglide™ Ride Control | Standard |
Hydraloc™ Safety System | Standard |
Hydrostatic Drive - Servo | Standard |
Lift Arm Support Device | Standard |
Self-Leveling Lift Action | Standard |
Two-Speed Drive | Standard |