Global-CE > Skid Steer Loader > GEHL Skid Steer Loader > GEHL R105 Skid Loaders

GEHL R105 Skid Loaders

Height to Hinge Pin - Fully Raised (mm):

108.1" (2746)

Rated Operating Capacity (kg):

1,050 lbs. (476)

Net Power (kW):

33.1 hp (24.7)

View Complete Details

Get Latest Price Video Calls

Product Feature Product Parameter

Product Feature

The R105 is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.

Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
Lift arm hydraulic tubes are concealed and protected from the work environment.
Rated operating load can be readily increased with the addition of a counterweight.

Ergonomic controls in the R105 Skid Loader provide smooth loader and attachment operation.

Hand and foot throttle are standard equipment, providing quieter operation and less fuel consumption
T-Bar hands-only drive control system

Strong lift arm provides strength, durability and excellent view of the tires and sides of the loader for increased precision and safety.

The R105 has an ingenious design, including low-maintenance components and easy maintenance access.

Entire ROPS/FOPS structure pivots back, with gas-spring assist, for full, easy access to the internal hydraulic components.
Swing-open rear door and flip-up engine cover fully expose maintenance access points to engine, battery, filters and filler caps.
Maintenance-free axles are lubricated and sealed for long life.
Removable access plates for clean out.

Overall Width (mm)	48.4" (1229)
Overall Height to Top of ROPS (mm)	70.3" (1786)

Auxiliary Hydraulics - Standard (L/min)	14.5 gpm (55)
High-Flow Auxiliary Hydaulics - Option	NA
Reservoir Capacity (L)	8 gal. (30.3)

Dimensions
A Overall Operating Height - Fully Raised	139.6"
B Height to Hinge Pin - Fully Raised	107.5"
C Overall Height to Top of ROPS	70.3"
D Overall Length with Bucket	114"
E Dump Angle at Full Height	42°
F Dump Height	84.5"
G Dump Reach at Full Height	22.8"
J Rollback at Ground	29°
M Rollback Angle at Full Height	99°
O Seat to Ground Height	32.6"
P Wheelbase	34.5"
Q Overall Width - Less Bucket A	48.4"
R Bucket Width	55"
S Ground Clearance to Chassis	6.0"
V Overall Length - Less Bucket	88.9"
W Departure Angle	26°
X Clearance Circle – Front w/ Bucket	69.4"
Y Clearance Circle – Front w/o Bucket	44.1"
Z Clearance Circle – Rear	54.1"
Standard Specification Tire Size	27x8.5x15 HD
Engine
Make	Yanmar
Model	3TNV88C-KMS Tier IV
Gross Power @ 2500 rpm	34.7 hp
Net Power @ 2500 rpm	33.1 hp
Maximum Torque	80.7 ft.-lbs. @ 1820
Displacement	100 cu.in.
Hydraulic System
Auxiliary Hydraulics - Standard	14.5 gpm
High-Flow Auxiliary Hydraulics - Option	N/A
Reservoir Capacity	8 gal.
Electrical System
Battery	12-volt
Starter	12-volt
Alternator	40-amp
Capacities/Weights
Rated Operating Capacity^B	1,050 lbs.
Rated Operating Capacity with Optional Counterweight^B	1,175 lbs.
Fuel Tank	10.4 gal.
Travel Speed - Maximum	5.9 mph
Travel Speed with Two-Speed Option - Maximum	N/A
Operating Weight^C - Approximate	4,000 lbs.

Dimensions
A Overall Operating Height - Fully Raised	3546 mm
B Height to Hinge Pin - Fully Raised	2731 mm
C Overall Height to Top of ROPS	1786 mm
D Overall Length with Bucket	2896 mm
E Dump Angle at Full Height	42°
F Dump Height	2146 mm
G Dump Reach at Full Height	579 mm
J Rollback at Ground	29°
M Rollback Angle at Full Height	99°
O Seat to Ground Height	828 mm
P Wheelbase	876 mm
Q Overall Width - Less Bucket A	1229 mm
R Bucket Width	1404 mm
S Ground Clearance to Chassis	152 mm
V Overall Length - Less Bucket	2258 mm
W Departure Angle	26°
X Clearance Circle – Front w/ Bucket	1763 mm
Y Clearance Circle – Front w/o Bucket	1120 mm
Z Clearance Circle – Rear	1374 mm
Standard Specification Tire Size	27x8.5 x 15 HD
Engine
Make	Yanmar
Model	3TNV88C-KMS Tier IV
Gross Power @ 2500 rpm	25.5 kW
Net Power @ 2500 rpm	24.7 kW
Maximum Torque	109.4 Nm @ 1820
Displacement	1.6 L
Hydraulic System
Auxiliary Hydraulics - Standard	55 L/min
High-Flow Auxiliary Hydraulics - Option	N/A
Reservoir Capacity	30.3 L
Electrical System
Battery	675 CCA
Starter	2.3 kW
Alternator	40-amp
Capacities/Weights
Rated Operating Capacity^B	476 kg
Rated Operating Capacity with Optional Counterweight^B	533 kg
Fuel Tank	39.4 L
Travel Speed - Maximum	9.5 km/hr
Travel Speed with Two-Speed Option - Maximum	N/A
Operating Weight^C - Approximate	1814 kg

Controls
T-Bar Hand Controls Available	Standard
Hand/Foot Controls Available	Standard
Joystick Controls Available
Dual-Hand Controls Available
Engine
Engine Auto-Shutdown System
Engine Heater	Optional
Turbocharged Engine
Hydraulics
Auxiliary Hydraulics	Standard
High-Flow Auxiliary Hydraulics
Operator Station
Cab Enclosure	Optional
Foot or Hand-Controlled Throttle	Standard
Full Instrumentation	Standard
Heater	Optional
Horn	Optional
Integral Access Plate (Removable)	Standard
Restraint Bar with Padded Armrests/Seat Belts
ROPS/FOPS Level II Overhead Guard, Integral Side Screens	Standard
Sound Reduction Package
Suspension Seat - Mechanical	Optional
Work Lights, Front and Rear	Standard
Performance
All-Tach® Attachment Mounting System	Standard
Anti-Vandalism Protection	Standard
Back-Up Alarm	Optional
Brake Control (Auto/Manual)	Standard
Hydraglide™ System
Hydraloc™ System	Standard
Hydrostatic Drive	Standard
Lift Arm Support Device	Standard
Self-Leveling Lift Action	Optional
Two-Speed Drive