Engine
|
| Net power |
66.0 kW |
| Model |
Cat 3054C Mechanical Turbine |
| Discharge |
The engine conforms to the United States EPA Tier 2/European Union Stage II Equivalent emission standards。 |
| Rated power（Standard）- 2200 rpm - Total power - ISO 14396 |
68.5 kW |
| Net power - 2200 rpm - ISO 9249 |
66.0 kW |
| Net peak power - 2000 rpm - SAE J1349 |
65.0 kW |
| Net peak power - 2000 rpm - ISO 9249 |
65.0 kW |
| Net peak power - 2000 rpm - EEC 80/1269 |
65.0 kW |
| Torque reserve - 1200 rpm - Net worth |
38% |
| Maximum torque - 1400 rpm |
394.0 N·m |
| Cylinder bore |
105.0 mm |
| Stroke |
127.0 mm |
| Displacement |
4.4 l |
| Remark（1） |
Nominal net power means that the engine is equipped with a fan、Air Cleaner、Power measured at flywheel with silencer and alternator。 |
| Remark（2） |
Elevation below 2286 m Its rated power can be maintained at。 The automatic derate function protects the hydraulic and transmission system。 |
Weight
|
| Operating weight - Nominal |
7990.0 kg |
| Operating weight - Max |
8760.0 kg |
Hydraulic system
|
| Type |
Closed center |
| Pump type |
Variable flow axial piston pump |
| Maximum pump displacement |
132.0 l/min |
| System pressure - Backhoe |
250.0 bar |
| System pressure - Loader |
250.0 bar |
Noise level
|
| Inside the cab |
80.0 dB（A） |
| Outside of the cab |
104.0 dB（A） |
Gearbox
|
| Notice |
Equipped with 16.9×28 at rear tire，Travel speed of 2WD Backhoe Loader at full throttle。 |
| Power Shuttle Transmission - First gear forward |
5.5 km/h |
| Power Shuttle Transmission - Second gear forward |
9.0 km/h |
| Power Shuttle Transmission - Third gear forward |
20.7 km/h |
| Power Shuttle Transmission - Fourth gear forward |
40.0 km/h |
| Power Shuttle Transmission - Reverse first gear |
5.5 km/h |
| Power Shuttle Transmission - Reverse second gear |
9.0 km/h |
| Power Shuttle Transmission - Reverse third gear |
20.7 km/h |
| Power Shuttle Transmission - Reverse fourth gear |
40.0 km/h |
Maintenance refill capacity
|
| Cooling system |
22.0 l |
| Fuel tank |
160.0 l |
| Engine oil - With filter |
8.8 l |
| Gearbox - Power shuttle - All-wheel drive |
15.0 l |
| Rear axle |
14.5 l |
| Rear Axle - Planetary gear |
1.5 l |
| Front axle（All-wheel drive） |
11.0 l |
| Front axle（All-wheel drive）– Spider gear |
0.7 l |
| Hydraulic system |
106.0 l |
| Hydraulic oil tank |
40.0 l |
Weight*
|
| Operating weight - Anticipated |
7990.0 kg |
| Operating weight - ROPS Structure - Maximum value |
8760.0 kg |
| Counterweight – Basic |
115.0 kg |
| Medium counterweight |
240.0 kg |
| Recommended minimum counterweight – Standard stick：Loader bucket – Universal type |
115.0 kg |
| Recommended minimum counterweight – Standard stick：Loader bucket – Multipurpose type |
0.0 kg |
| Notice |
*Machine configuration – Standard engine、Standard stick、Standard cab（With air conditioning）、All-wheel drive standard shift transmission、0.96 m³ Multipurpose loader bucket、610 mm Standard Duty Digging Bucket、12.5/80-18 and 16.9-28 tires、No counterweight、80 kg Operator and full fuel tank。 |
Axle – All-wheel drive（AWD）
|
| Function（1） |
Heavy-duty rear axle with self-adjusting inboard brake、Differential lock and final drive。 |
| Function（2） |
AWD Engaged by the front console panel switch，Or by the brake pedal during all-wheel braking。 AWD Can be engaged during driving，Whether the machine is under load or not、Any gear、Forward or backward，Can be engaged。 AWD Use external final driven，And is convenient to maintain。 |
| Function（3） |
AWD The front axle is pendulum mounted，Permanently sealed and lubricated，No routine maintenance required。 In addition，Also equipped with double-acting steering cylinder，Steering angle up to 52°，Higher mobility can be achieved。 |
Axle rating
|
| Front axle（All-wheel drive）– Static |
22943.0 kg |
| Front axle（All-wheel drive）– Dynamic |
9177.0 kg |
| Rear Axle - Static |
19120.0 kg |
| Rear Axle - Dynamic |
7648.0 kg |
Turn
|
| Type |
Front wheel |
| Power steering |
Hydrostatic |
| AWD Cylinder，One（1）A double action – Cylinder bore |
65.0 mm |
| AWD Cylinder，One（1）A double action – Stroke |
120.0 mm |
| AWD Cylinder，One（1）A double action – Connecting rod diameter |
36.0 mm |
| Turning circle - All-wheel drive（The inner wheel is not braked）– Outside of front wheel |
8.18 m |
| Turning circle - All-wheel drive（The inner wheel is not braked）– Outside of widest loader bucket |
10.97 m |
Brake
|
| Type |
Full-closed hydraulic power-assisted multi-disc brake。 |
| Function（1） |
The final drive input shaft is internally mounted with a number of hydraulically actuated, oil-immersed Kevlar Brake disc。 |
| Function（2） |
Completely close the oil seal。 |
| Function（3） |
Automatic adjustment。 |
| Function（4） |
Two foot-operated power-assisted brake pedals，Can be interlocked during driving。 |
| Function（5） |
Parking brake/Secondary braking is independent of the service braking system。 The parking brake is mechanically activated by the manual lever on the right-hand console。 |
| Function（6） |
Conform ISO 3450:1996 Requirements。 |
Machine dimensions - Universal type - 1.05 M3
|
| Total length - Travel position |
5726.0 mm |
| Total transport length |
5678.0 mm |
| Total transport height - 4.3 m |
3757.0 mm |
| Overall width - Without loader bucket |
2346.0 mm |
| Height - Cab/Top of the canopy |
2869.0 mm |
| Height - Top of the exhaust pipe |
2716.0 mm |
| Rear axle - Centerline to front grille |
2708.0 mm |
| Wheelbase - All-wheel drive |
2200.0 mm |
| Notice |
Unless otherwise noted，Otherwise, the dimensions and performance specifications shown apply to machines equipped with：12.5/80-18 SGL Front tire、16.9-28c Rear tire、Standard cab、Standard stick（Equipped with 610 mm Standard Duty Bucket）、1.05 m³ Universal Loader Bucket and Standard Equipment。 |
Machine dimensions - Multipurpose type - 0.96 M3
|
| Total length - Travel position |
5682.0 mm |
| Total transport length |
5675.0 mm |
| Total transport height - 4.3 m |
3757.0 mm |
| Overall width - Without loader bucket |
2346.0 mm |
| Height - Cab/Top of the canopy |
2869.0 mm |
| Height - Top of the exhaust pipe |
2716.0 mm |
| Rear axle - Centerline to front grille |
2708.0 mm |
| Wheelbase - All-wheel drive |
2200.0 mm |
| Notice |
Unless otherwise noted，Otherwise, the dimensions and performance specifications shown apply to machines equipped with：12.5/80-18 SGL Front tire、16.9-28c Rear tire、Standard cab、Standard stick（Equipped with 610 mm Standard Duty Bucket）、1.05 m³ Universal Loader Bucket and Standard Equipment。 |
Loader Bucket Dimensions and Performance：Universal type - 1.05 M3
|
| Load capacity |
1.05 m³ |
| Width |
2262.0 mm |
| Lifting capacity at maximum height |
3610.0 kg |
| Raise the digging force |
54.46 kN |
| Oblique digging force |
53.92 kN |
| Tipping load - Excavation site |
7012.0 kg |
| Maximum Hinge Pin Height |
3447.0 mm |
| Dump angle at the highest point |
46° |
| Dump height at maximum angle |
2733.0 mm |
| Dump distance at maximum angle |
900.0 mm |
| Maximum bucket tilt angle at ground level |
38° |
| Depth of excavation |
88.0 mm |
| Maximum angle of entry |
113° |
| Grille to Bucket Edge，Carrying position |
1482.0 mm |
| Maximum working height |
4368.0 mm |
| Bucket weight - Shovel teeth and forks not included |
428.0 kg |
Loader Bucket Dimensions and Performance：Multipurpose type - 0.96 M3
|
| Load capacity |
0.96 m³ |
| Width |
2262.0 mm |
| Lifting capacity at maximum height |
3475.0 kg |
| Raise the digging force |
54.0 kN |
| Oblique digging force |
60.48 kN |
| Tipping load - Excavation site |
7110.0 kg |
| Maximum Hinge Pin Height |
3447.0 mm |
| Dump angle at the highest point |
46° |
| Dump height at maximum angle |
2764.0 mm |
| Dump distance at maximum angle |
825.0 mm |
| Maximum bucket tilt angle at ground level |
39° |
| Depth of excavation |
147.0 mm |
| Maximum angle of entry |
116° |
| Grille to Bucket Edge，Carrying position |
1450.0 mm |
| Maximum working height |
4368.0 mm |
| Bucket weight - Shovel teeth and forks not included |
611.0 kg |
Backhoe Dimensions and Performance - Standard stick - 4.3 M
|
| Depth of excavation - SAE Maximum value |
4119.0 mm |
| Depth of excavation，Manufacturer's maximum |
4709.0 mm |
| Depth of excavation - 2440 mm Horizontal bottom |
3743.0 mm |
| Depth of excavation - 600 mm Horizontal bottom |
4094.0 mm |
| Depth of excavation，600 mm Horizontal bottom，Manufacturer |
4670.0 mm |
| Flat stretch distance（From swivel pivot） |
5609.0 mm |
| Maximum working height |
5719.0 mm |
| Loading height |
4031.0 mm |
| Loading reach |
1477.0 mm |
| Arc of rotation |
180° |
| Bucket rotation |
205° |
| Total width of stabilizer |
2242.0 mm |
| Bucket digging force |
57.22 kN |
| Arm digging force |
35.29 kN |
