XCMG EBZ160 Boring Machine
Total weight:
47000kg
Total installed power:
160/80kW
Product Feature
Cutting head adopts simulation technology to optimize the design,and the arrangement of picks on it is reasonable.All these make the machine has high cutting efficiency and stronger rock breaking capacity.
The adoption of straight structure on the first conveyor makes it smooth to connect with ramp board and unobstructed to convey.
Hydraulic system adopts constant power, pressure cut off and load sensitive control.
The use of three layer of arc spraying system makes it effectively to dust suppression.
Product Parameter
| Project | Unit | Parameter |
| Total weight | (kg) | 47000 |
| Overall dimension | ||
| Total length without additional conveyor | (mm) | 9340 |
| Total width Ramp plate | (mm) | 2900/2500 |
| Total width Main frame | (mm) | 2330 |
| Total height The highest point of cutting head for laying horizontally | (mm) | 2007 |
| Total height Main frame | (mm) | 1650 |
| Undercut max telescoping/non-telescoping | (mm) | 216/200 |
| Ground clearance of machine | (mm) | 250 |
| Height Cutting cross section | (mm) | 4800/1770 |
| WidthCutting cross section | (mm) | 5400/5250 |
| Area Cutting cross section | (m²) | 26/25 |
| Gantry height | (mm) | 400 |
| Max./Economic compressure strength for cutting coal petrography | (MPa) | ≤80/60 |
| Upgrade ability | (°) | ±18 |
| Travel speed | (m/min) | 6.5 |
| Minimum curve radius | - | 0.148 |
| Average floor pressure | (MPa) | 265 |
| Total installed power | (kW) | 160/80 |
| Installed power of cutting motor | (kW) | 90 |
| Installed power of pump motor | (kW) | AC660/1140 |
| Supply voltage | (V) | 50 |
| Line frequency | (Hz) | 48/24 |
| Rotation speed of cutting head | (r/min) | 48/24 |
| Loading capacity | (m³/min) | Star wheel type/4.32 |
| Crawler width | (mm) | 520 |
| Out width of crawlers | (mm) | 2330 |
| Tensioning style | - | Cylinder tensioning and snap-gauge locking |
| Pressure of water spraying | (MPa) | External spraying≥1.5；Internal spraying≥3 |
| Max.non-removable parts size | (mm) | 3380×1200×1520 |
| Max.non-removable parts mass | (kg) | 5500 |
