GEHL RS9-50 GEN:3 Telescopic Handlers
Rated Lift Capacity (kg):
6,600 lbs. (2994)
Gross Power (kW):
120 hp (89)
Maximum Lift Height (m):
42' 0" (12.8)
Product Feature
The model RS9-50 GEN:3 is built with high quality components, for long life and superior performance.
- Land 5,000 lbs at 47' 0" high without moving the machine.
- Additional reach of 50' 0" telescopic boom provides greater work range and material placement ability than competitive 42' 0" or 44' 0" units..
- Boom tip lift hook option is now available as a factory-installed option or field installed option.
- Proven welded box-section telescopic boom design maximizes material lift and placement.
- Cylinder design provides one of the fastest cycle times in the industry.
- Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
- Internal wet disc brakes provide excellent braking and long life.
- Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
The RS9-50 GEN:3 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity.
- 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
- ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
- Virtually 360-degree visibility increases safety and operating accuracy.
- Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
- Side and rear glass is standard equipment.
Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- In 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites..
The RS9-50 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently.
- Dana four-speed power-shift transmission is easy to operate.
- Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
The model RS9-50 GEN:3 has outstanding hydraulic system and control performance.
- Dual-function, pilot-assisted joystick is standard equipment.
- Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
- Boom tip auxiliary hydraulics are standard to power hydraulic operated attachments.
- Auto-leveling feature keeps loads level when raising/lowering the boom.
Plenty of access points and over-sized covers make service and maintenance on the RS9-50 GEN:3 quick and efficient.
- Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
- Side-mounted fuel tank with battery access and an additional storage compartment.
- Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
- Shorter hoses from main valve to boom provide a compact hose routing, enhancing serviceability.
Product Parameter
Max. Lifting Heigh | 50' 1" (15.3 m) |
Max. Capacity w/ Forks | 9,000 lbs. (4,082 kg) |
Capacity at Max. Height | 5,000 lbs. (2,268 kg) |
Max. Outreach | 36' 7" (11.1 m) |
Max. Forward Capacity | 500 lbs. (227 kg) |
Engine Brand | Cummins QFS 3.8 |
Engine Power | 120 hp (89 kW) |
Engine Technology | Tier IV |
Transmission | Dana T13000 |
Max. Travel Speed | 20.1 mpg (32.3 km/h) |
Unladen Weight | 29.900 lbs. (13,562 kg) |
Overall Width | 8' 4" (2.53 m) |
Overall Length | 21' 0" (6.4 m) |
Overall Height | 8' 6" (2.6 m) |
Outside Turning Radius | 13' 11" (4.24 m) |
Ground Clearance | 18" (457 mm) |
Fuel Tank Capacity | 47 gal. (178 L) |
Axle Brand | Dana |
|
|
|
|
|
|
Performance | |
Load Placement |
|
Rough Terrain Ability |
|
Versatility | |
Attachment Variety |
|
Safety | |
Visibility |
|
Safety |
|
Speed Management |
|
Ease of Use & Ergonomics |
|
Turning Radius (m) | 13'8" (4.2) |
Manufacturer | Cummins |
Model | QSF 3.8 Tier IV |
Power (kW) | 120 hp (89) |
Maximum Travel Speed (km/hr) | 19.6 mph (31.5) |
Rated Speed | 2,500 rpm |
Pump Type | Gear |
Total Capacity (L/min) | 41.5 gpm (157) |
System Pressure (bar) | 3,000 psi (207) |
Hydraulic Reservoir Capacity (L) | 45 gal. (170) |
A | Carriages – Masonry, framing and standard carriages available in different widths. |
B | Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide. |
C | Fork Shift - 48" (1219 mm) wide. |
D | Personnel Work Platforms - 180° swing platform and 48” x 50” x 114” (1219 mm x 1270 mm x 2895 mm) platform. |
E | Swing Carriage – 90° and 180° swing. |
F | Log and Pipe Grapple - 78" wide. |
G | Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable. |
H | Truss Boom - 15' (4.5 m) with optional winch. |
Capacities |
|
---|---|
Lift Capacity | 9,000 lbs. |
Maximum Lift Height | 50'1" |
Capacity at Maximum Lift Height | 5,000 lbs. |
Maximum Forward Reach | 36'7" |
Capacity at Maximum Forward Reach | 500 lbs. |
Load Chart |
|
---|---|
A | 6,600/6,600 lbs. |
B | 6,000/6,600 lbs. |
C | 5,000/6,000 lbs. |
D | 4,000/4,000 lbs. |
E | 3,000/4,000 lbs. |
F | 2,000/4,000 lbs. |
G | 1,000/3,000 lbs. |
Engine |
|
---|---|
Manufacturer | Cummins |
Model | QSF 3.8 Tier IV |
Power | 120 hp |
Aspiration | Turbocharged |
Rated Speed | 2,500 rpm |
Components |
|
Transmission | Dana 4-speed Powershift |
Maximum Travel Speed | 15.3 mph |
Selective Steering | 4-Wheel 2-Wheel Crab |
Brakes | 4-Wheel Internal Wet-Disc Brake |
Parking Brake | Spring-Applied, Hydraulic Release (SAHR) on Front Axle |
Axle Manufacturer | Dana |
Hydraulics |
|
Pump Type | Gear |
Total Capacity | 41.5 gpm |
System Pressure | 3,000 psi |
Hydraulic Reservoir Capacity | 31 gal. |
General Specifications |
|
Approximate Weight | 29,900 lbs. |
Length - Less Forks | 21'0" |
Width | 8'3" |
Ground Clearance | 18" |
Wheelbase | 10'4" |
Turning Radius | 13'11" |
Overall Height | 8'6" |
Frame Leveling | ±10° |
Fuel Capacity | 47 gal. |
Tire Options |
|
13.00 x 24/12 PR | |
13.00 x 24/12 PR Foam-Filled | |
13.00 x 24/12 PR - Rock | |
13.00 x 24 Solid Rubber |
Capacities |
|
---|---|
Lift Capacity | 4082 kg |
Maximum Lift Height | 15.3 m |
Capacity at Maximum Lift Height | 2268 kg |
Maximum Forward Reach | 11.1 m |
Capacity at Maximum Forward Reach | 227 kg |
Engine |
|
Manufacturer | Cummins |
Model | QSF 3.8 Tier IV |
Power | 89 kW |
Aspiration | Turbocharged |
Rated Speed | 2500 rpm |
Components |
|
Transmission | Dana 4-speed Powershift |
Maximum Travel Speed | 24.6 km/hr |
Selective Steering | 4-Wheel 2-Wheel Crab |
Brakes | 4-Wheel Internal Wet-Disc Brake |
Parking Brake | Spring-Applied, Hydraulic Release (SAHR) on Front Axle |
Axle Manufacturer | Dana |
Hydraulics |
|
Pump Type | Gear |
Total Capacity | 157 L/min |
System Pressure | 207 bar |
Hydraulic Reservoir Capacity | 117.3 L |
General Specifications |
|
Approximate Weight | 13,562 kg |
Length - Less Forks | 6.4 m |
Width | 2.5 m |
Ground Clearance | 457 mm |
Wheelbase | 3.1 m |
Turning Radius | 4.24 m |
Overall Height | 2.6 m |
Frame Leveling | ±10° |
Fuel Capacity | 178 L |
Tire Options |
|
13.00 x 24/12 PR | |
13.00 x 24/12 PR Foam-Filled | |
13.00 x 24/12 PR - Rock | |
13.00 x 24 Solid Rubber |