Ammann AFT 200-2ASPHALT PAVERS
Operating weight:
5900 kg
Standard paving width:
1.20 - 2.40 m
Max. paving width with extension:
3.10 m
Product Feature
- Theoretical paving capacity of 300 tonnes per hour
- Maximum paving width of 3.1 metres
- Electric- or gas heating for screeds
- Vibration screeds (AFT 200-2) and tamper / vibration screeds (AFT 300-2)
- High quality components
- Excellent visibility from the operator platform
- Modern design
- Material hopper with capacity of 5 tonnes
- Low centre of gravity and wide tracks for optimal traction
- The fully automated material feeding systems of the AFT 200-2 and AFT 300-2 ensure quality results. A variety of features reduce segregation and enhance productivity.
- Large feeding capacity of up to 300 tonnes per hour
- 620 mm material tunnel
- A divided conveyor with single-drive system to guide flow during asymmetrical paving by covering one side
- Material flow is controlled by mechanical sensors
- Intuitive controls
- Each toggle switch positioned according to function group and frequency of use
- Backrest that includes a storage compartment
- Non-slip platform profile
- Sliding step extensions for increased visibility
- Powerful and quiet
- Improved fuel efficiency and cold-start performance
- New cylinder block with deep crankcase for higher power and torque
- Vibration available in basic screed and mechanical extensions
- Robust and wear-resistant components
- Wide bottom plates of 205 mm for smooth paving
- Vibration screed on AFT 200-2
- Tamper / vibration screed available for AFT 300-2
- Hydraulic motors for the tamper on AFT 300-2
- Tamper and vibration system pre-compacts for best paving results
Product Parameter
| Weight & Dimensions | |
|---|---|
| Weight | 5800 kg |
| A – Length (Machine) | 4360 mm |
| B – Length (Transport) | 3880 mm |
| C – Length (Tracks) | 1390 mm |
| D – Length (Material hopper) | 1310 mm |
| E – Height (Machine) | 1900 mm |
| F – Height (Transport) | 1900 mm |
| G – Height (w.o. Canopy) | 1900 mm |
| I – Width (Machine, open hoppers) | 2830 mm |
| J – Width (Transport) | 1200 mm |
| K- Width (Track gauge) | 940 mm |
| L – Max. approach angle | 15° (front ) / 10° (back) |
| Capacity & Performance | |
| Placement thickness (max) | -150 up to 200 |
| Theoretical paving capacity | 300 t/h |
| Paving speed | 27 m/min |
| Transport speed | 3.3 km/h |
| Material Feeding System | |
| Hopper dumping height center (w. hopper flap) | 570 mm |
| Hopper width, internal | 2830 mm |
| Conveyor type | Splitted conveyor drive with center cover |
| Conveyor width | 620 mm |
| Conveyor control | Automatic with limit switches |
| Auger diameter | 320 mm |
| Auger control | Automatic with ultrasonic sensors |
| Auger height adjustment | – |
| Operator Station | |
| Operator console | Conventional |
| Dashboard | Conventional |
| Platform | With back rest for operator safety |
| Engine | |
| Engine model | Deutz TD2.9 L4 |
| Rated power KW @ 2200 rpm | 49 (66 hp) |
| Emissions | EU 3A/3B (Tier3 / 4f) |
| Electrical system | 24 V |
| Fuel tank capacity | 85 l |
| Crawler | |
| Crawler length | 1390 mm |
| Crawler width | 205 mm |
| Final drive | Direct drive over transmissions |
