CAT Cat ® AP655F Steel Track Asphalt paver
Product Feature
● Fuel efficient and quiet
CAT C7.1 Engine
C7.1Engines can provide 151 kW(205 hp)The power of,And in line with the United States EPA Tier 3 and EU Stage IIIA Equivalent emission standards。
Fuel saving mode
The engine speed in economy mode is 1650 rpm,Thereby reducing fuel consumption.,Reduced noise level。The machine is designed to operate in a fuel-efficient mode,Suitable for most applications。
Automatic control function of engine speed
When automatic engine speed control is enabled,The engine speed will decrease to 1000 when the propel lever is moved into neutral rpm Idle speed,Or 1300 when screed heating is enabled rpm。
Advanced Fuel Economy Mode
The simultaneous activation of Economy Mode and Automatic Engine Speed Control changes the engine speed according to the load factor。If enabled,The engine will be paved at 1650 rpm Run at the speed of。If the upper power limit is exceeded,The engine speed will increase to 2200 rpm And remain unchanged.,Until the demand falls below the upper limit for 30 second,This ensures reliable performance。
● Quick starting device
Quiet heating
Quiet heating mode at 1300 rpm Operate at engine speed of,And provide heating within 15 minute。
Fast heating
When equipped with a wide paving kit,Rapid heating mode for rapid heating in 35 minutes。When the screed is at the standard telescoping width,Fast heating is no faster than quiet heating.。
Temperature range
Three preset heating options provide a wide range of temperatures for various mix designs;The low temperature is 110°C Or 230°F,The medium temperature is 130°C Or 266°F,High temperature is 160°C Or 320°F。
● More comprehensive control
The view is wider,Better comfort
Dual independent operator stations can extend out of the rack,Have a good all-round view。Compact front-loading cooling system improves forward visibility,The redesigned auger assembly optimizes the visibility of the material height in front of the screed。Heated seat option、Seat multi-way adjustment and tilt console,Keep operators comfortable throughout the day。The top-mounted cooling system can make the smoke、Keep hot air and fan noise away from cooler operator,And provide a quieter working environment。
Smoke management
Proprietary ventilation system draws smoke out of the conveyor tunnel and auger chamber,Keep it away from the operator,This creates a more comfortable working environment for the operator。
● Waterproof display
Simple technology
Technology helps operators perform better。Intuitive symbols and large graphics simplify operation,But through interactivity LCD Touch the display to access the generator start、Screed temperature control and mix height adjustment,And that efficiency is improve。
One-touch operation
By mean of a feeding system for automatic refilling、One-touch function for feed system activation and hopper control,Operators are able to focus on other tasks,So that that efficiency is improve。
● Improve efficiency
Automatic filling type feeding system
The self-priming feed system allows the conveyor and auger to work alternately,Until the mixture height reaches the sensor set point,Eliminates manual enablement and continuous monitoring,Thereby simplifying the process.。
One-touch feeding system
Push the button to activate both augers and both conveyors at the same times,This simplifies the setup。When needed,Each auger and each conveyor can be operated separately。
Single Touch Hopper Control
Just touch the button and release it,Hopper wing plate and hydraulic hopper door can be folded。The system can be customized,In order to activate the left or right wing separately or simultaneously、Or hydraulic front hopper door。
Cleaning and preheating mode
This function starts the auger at a low speed、Conveyor and tamper bar(If equipped),Ability to spray release agent to prevent material build up。
Mixture height adjustment
When needed,From the tractor LCD Change the mix height in front of the screed on the display,Thereby increasing versatility.。
Hydraulic main frame extension plate
Optional 457 mm(18")The hydraulic main frame extension plate is attached to the auger assembly,The material can smoothly flow to the expander.。When reducing the paving width,They can be retracted with the screed extension。
Multi-feed sensor option
The feeding system can be customized,For automatic operation without or with 2 or 4 feed sensor。When paving without sensors due to failure,Simply set the feed system to“Automatic”And adjust that setting of the mixture height,Eliminates the need to cycle manual switches as in previous model。
Maintenance is more convenient
Base plate without fasteners simplifies replacement,The bottom side fasteners of the chain guard prevent bolt wear and material accumulation,And is convenient to replace。
● Steel Track Undercarriage
Performance
Low maintenance design、Swing bogies and large track shoes ensure excellent buoyancy and a smooth ride。
Durability
Large 3048 x 356 mm Floor space、Self-tensioning tracks and bonded shoes provide excellent traction and durability。
● SE Series screed
Screed heating technology
Proprietary temperature zone monitoring allows heating to continue in the event of a temperature sensor failure。The system also monitors the failure of the heating element,Eliminates unnecessary replacement。
Easily adjusted
The screed's feed system rate adjustment provides versatility。Extender height、Standard hydraulic adjustment for grade and camber,Allows adjustment during driving at standard and maximum paving width。
Two-speed extender control
Proprietary two-speed proportional expander control,Speed can be reduced when paving width is extended,So that precise control and quick reaction can be carry out around an obstacle。
And is convenient to replace
The heating element can slide out,Easy to replace,No need to remove the screed。Machined screed frame simplifies screed replacement and leveling。
Tamper screed option
Screed with tamper bar for increased density,Because it causes the material to collect under the screed。2 mm、4 mm And 7 mm Three stroke settings provide versatility,And has 700 to 1800 rpm Variable tamper bar speed range。
Wide paving kit
Proprietary Power Controls Simplify Entire 10.0 m(33 ft)Adjustment of paving width,Better texture and quality of the paving layer。Innovative design uses spreader slope to connect wide paving kits,No need to use additional lifting equipment。
● CAT GRADE CONTROL
The operation is simple
F Series pavers can be operated from either of two tractor or two screed console Cat Grade Control。Split screen mode can be set to monitor each side of the screed,To allow for single-person operation。
Precise control
The control is more precise,And that utilization rate of the mixture is improve to the maximum extent.,And that cost is save。By an acoustic wave sensor using 5 sensor,Discard two readings and average the remaining three reading,Thus achieving a true average。10-point automatic calibration,Eliminates single calibration point overshoot/Too low problem。Cross connections are used,Adjust the height to keep the slope and elevation constant。Real 9 m(30 ft)Sonic Balance Bar,You can make the movement of the tow point account for 1% of the total slope deviation/3。
Highly reliable
Waterproof display、Factory-installed components and consistent wiring provide excellent performance。The sealing components are heat resistant、Damp-proof and vibration-proof,Built-in temperature sensor has better reliability than shackle type sensor。
Product Parameter
Weight |
|
Operating weight - Paver only |
16043 kg |
Operating weight - Only SE60 V Screed |
3400 kg |
Operating weight - Only SE60 VT XW Screed |
4490 kg |
Shipping weight - Paver only |
15757 kg |
Operating weight - Only SE50 VT Screed |
3340 kg |
Operating weight - Only SE60 V XW Screed |
4070 kg |
Operating weight - Only SE50 V Screed |
3284 kg |
Working technical specifications |
|
Standard paving range - SE60 V、 SE60 V XW、SE60 VT XW |
3.0-6 m(9' 10" - 19' 6") |
Maximum paving speed - Screed with tamper bar |
25 m/min |
Maximum paving speed - With vibrating screed |
64 m/min |
Inside turning radius |
0.5 m |
Maximum travel speed |
6.5 km/h |
Maximum paving width - SE50 V |
6.5 m |
Standard paving range - SE50 V、SE50 VT |
2.55-5 m(8' 4" - 16' 4") |
Maximum throughput capacity |
1300 tonnes/hr |
Hopper capacity |
7.1 m³ |
Maximum paving width - SE60 V |
7.65 m |
Maximum paving width - SE50 VT |
8 m |
Maximum paving width - SE60 V XW、SE60 VT XW |
10 m |
Engine |
|
Total power |
151 kW |
ENGINE |
|
Engine model |
Cat C7.1 |
SERVICE REFILL CAPACITIES |
|
Fuel tank capacity |
278 l |
Service refill capacity |
|
DEF Box |
19.1 l |