CAT Cat®AP1055F Crawler asphalt paver
Product Feature
● Fuel efficient and quiet
CAT C7.1 Engine
C7.1Engines available with 186 kW(249 hp)The power of,In line with the United States EPA Tier 3 and EU Stage IIIA Emission standards。
Fuel saving mode
The engine speed in economy mode is 1650 rpm,Thereby reducing fuel consumption.,Reduced noise level。 The machine is designed to operate in a fuel-efficient mode,Suitable for most applications。
Automatic control function of engine speed
When automatic engine speed control is enabled,The engine speed will decrease to 1000 when the propel lever is moved into neutral rpm Idle speed,Or 1300 when screed heating is enabled rpm。
Advanced Fuel Economy Mode
The simultaneous activation of Economy Mode and Automatic Engine Speed Control changes the engine speed according to the load factor。 If enabled,The engine will be paved at 1650 rpm Run at the speed of。 If the upper power limit is exceeded,The engine speed will increase to 2200 rpm And remain unchanged.,Until the demand falls below the upper limit for 30 second,This ensures reliable performance。
● Quick starting device
Quiet heating
Quiet heating mode at 1300 rpm Operate at engine speed of,And provide heating within 15 minute。
Fast heating
When equipped with 10 m(33')When paving kit wide,Rapid heating mode provides heating in 35 minutes。
Temperature range
Three preset heating options provide a wide range of temperatures for various mix designs;The low temperature is 110°C Or 230°F,The medium temperature is 130°C Or 266°F,High temperature is 160°C Or 320°F。
● More comprehensive control
The view is wider,Better comfort
Dual independent operator stations can extend out of the rack,Have a good all-round view。 Compact front-loading cooling system improves forward visibility,The redesigned auger assembly optimizes the visibility of the material height in front of the screed。 Heated seat option、Seat multi-way adjustment and tilt console,Keep the operator comfortable throughout the day。 The top-mounted cooling system can make the smoke、Keep hot air and fan noise away from cooler operator,And provide a quieter working environment。
Smoke management
Proprietary ventilation system draws smoke out of the conveyor tunnel and auger chamber,Keep it away from the operator,This creates a more comfortable working environment for the operator。
● Waterproof display
Simple technology
Technology helps operators perform better。 Intuitive symbols and large graphics simplify operation,But through interactivity LCD Touch the display to access the generator start、Screed temperature control and mix height adjustment,And that efficiency is improve。
One-touch operation
By mean of a feeding system for automatic refilling、One-touch function for feed system activation and hopper control,Operators are able to focus on other tasks,So that that efficiency is improve。
● Improve efficiency
Automatic filling type feeding system
The self-priming feed system allows the conveyor and auger to work alternately,Until the mixture height reaches the sensor set point,Eliminates manual enablement and continuous monitoring,Thereby simplifying the process.。
One-touch feeding system
Two augers and two conveyors are automatically activated by pressing one button,This simplifies the setup。 When needed,It is also possible to operate each auger and each conveyor separately。
Single Touch Hopper Control
Just touch the button and release it,Hopper wing plate and hydraulic hopper door can be folded。 The system can be customized,In order to activate the left or right wing separately or simultaneously、Or hydraulic front hopper door。
Cleaning and preheating mode
This function starts the auger at a low speed、Conveyor and tamper bar(If equipped),Ability to spray release agent to prevent material build up。
Mixture height adjustment
When needed,From the tractor LCD Change the mix height in front of the screed on the display,Thereby increasing versatility.。
Hydraulic main frame extension plate
Optional 457 mm(18")The hydraulic main frame extension plate is attached to the auger assembly,The material can flow to the expander smoothly.。 When reducing the paving width,They can be retracted with the screed extension。
Multi-feed sensor option
The feeding system can be customized,For automatic operation without or with 2 or 4 feed sensor。 When paving without sensors due to failure,Simply set the feed system to“Automatic”And adjust that setting of the mixture height,Eliminates the need to cycle manual switches as in previous model。
Maintenance is more convenient
Base plate without fasteners simplifies replacement,The bottom side fasteners of the chain guard prevent bolt wear and material accumulation,And is convenient to replace。
● MOBIL-TRAC Chassis system
Performance
Mobil-Trac The undercarriage minimizes the movement of the tow point。 Front、The rear bogie group can climb over obstacles.,Maintain good grounding。 The smooth track option excels when driving on soft roadbeds and fresh asphalt。 Pattern design in soft paving/Excellent performance under road conditions。
Durability
Self-tensioning accumulator、Center guide block and strong internal track cable ensure excellent durability。 Components are rubber-coated,O as to push the asphalt,Prevent accumulation。
● SE60 series screed
Screed heating technology
Proprietary temperature zone monitoring allows continued heating in the event of a temperature sensor failure。 The system also monitors the failure of the heating element,Eliminates unnecessary replacement。
Easily adjusted
The screed's feed system rate adjustment provides versatility。 Extender height、Standard hydraulic adjustment for grade and camber,Allows adjustment during driving at standard and maximum paving width。
Two-speed extender control
Proprietary two-speed proportional expander control,Speed can be reduced when paving width is extended,So that precise control and quick reaction can be carry out around an obstacle。
And is convenient to replace
The heating element can slide out,Easy to replace,No need to remove the screed。 Machined screed frame simplifies screed replacement and leveling。
Tamper screed option
Screed with tamper bar for increased density,Because it causes the material to collect under the screed。 The three stroke settings are 2 mm、4 mm And 7 mm,And has a range of 0 to 1800 rpm Variable tamper bar speed range,Versatility available。
Wide paving kit
Proprietary Power Controls Simplify Entire 10 m(33'4")Adjustment on paving width,Better texture and quality of the paving layer。 Innovative connection system utilizes spreader slope to connect wide paving kits,No need to use additional lifting equipment。
● CAT Grade Control
The operation is simple
F Series pavers can be operated from either of two tractor or two screed console Cat Grade Control。 Split screen mode can be set to monitor each side of the screed,To allow for single-person operation。
Precise control
The control is more precise,And that utilization rate of the mixture is improve to the maximum extent.,And that cost is save。 By an acoustic wave sensor using 5 sensor,Discard 2 readings and average the remaining 3 reading,Thus achieving a true average。 The 10-point auto-calibration routine eliminates single calibration point overshoot/Too low problem。 Cross connections are used,Adjust the height to maintain the slope and elevation。 Real 9 m(30')Sonic Balance Bar,You can make the movement of the tow point account for 1% of the total slope deviation/3。
Highly reliable
Waterproof display、Factory-installed components and consistent wiring provide excellent performance。 The sealing components are heat resistant、Damp-proof and vibration-proof,Built-in temperature sensor has better reliability than shackle type sensor。
Product Parameter
Weight |
|
Operating weight(Contain SE60 VT XW) |
21815 kg |
Operating weight(Contain SE60 V) |
20618 kg |
Towing vehicle shipping weight |
17015 kg |
Operating weight of the tractor |
17355 kg |
Operating weight(Contain SE60 V XW) |
20156 kg |
Operating specifications |
|
Standard paving range |
3.0-6 m(9' 10" - 19' 6") |
Hopper capacity - Standard entrance |
7.6 m³ |
Maximum paving width - SE60 V Screed |
7.65 m |
Maximum paving width - SE60 V XW、VT XW Screed |
10 m |
Hopper capacity - Low entry hopper |
8.1 m³ |
Size |
|
Working height without headliner |
3715 mm |
Working width - Low entry hopper |
3604 mm |
Working height - Including the roof |
4000 mm |
Working width - Standard access hopper |
3350 mm |
Truck access height(Low intake hopper contained) |
521 m |
Transport width(Including folded end gate) |
3 m |
Transport length(Contain SE60 V Screed) |
6.71 m |
Truck access height(Including standard inlet hopper) |
570 mm |
Transport width(Gate with screed end) |
3.21 m |
Transport length(Contain SE60 XW Series) |
6.9 m |
Transport height - The roof is retracted |
3.06 mm |
Working length(Contain SE60 V Screed) |
6.84 m |
Transport height - Roof is not included |
1.93 m |
Working length(Contain SE60 V XW Screed) |
7.34 in |
Working specifications |
|
Maximum paving speed - With vibrating screed |
64 m/min |
Inside turning radius |
0.5 m |
Maximum travel speed |
14.5 km/h |
Maximum paving speed - Screed with tamper bar |
25 m/min |
Maximum throughput capacity |
1602 tonnes/hr |
Engine |
|
Total power |
186 kW |
ENGINE |
|
Engine model |
Cat C7.1 |