Product Feature
Power system
●Weichai electronic control engine,Emission meets national non-road machineryⅢStage discharge requirements,Smart and efficient,And that part have strong universality,Low maintenance cost。
●The whole machine is matched with no-load、Medium load、Heavy-load three-power power model,Select according to actual working condition and load demand,Achieve power、Reasonable matching of efficiency and energy consumption;
●The traveling hydraulic system is equipped with one pump and four motors.,Install the flow dividing and collecting valve,Distribute hydraulic oil flow of four motors more reasonably。
Driving environment
●Cab front,Good line of sight,The cab can slide outward to the right,It is convenient to observe the operation status.。
●Reasonably arrange the control handle,The operation is more comfortable。
●Omnidirectional camera system,Four cameras provide a full range of vision for the operator,And is convenient for flexible operation.。
●Intelligent control operation,Parameters required for the large screen display can be preset on the display、Adjustment。
●Oil level display、GPSFunction、Reverse alarm bell。
Operational performance
●Equipped with automatic sprinkler mode,The amount of sprinkling can be based on the depth of regeneration.、Automatic adjustment of working speed。
●Front wheel、The rear wheels steer separately、Follow-up steering、Crab steering mode,The steering is flexible and convenient。
●Front、The rear support wheel is of four-column cylinder suspension type.,Upgraded four-wheel leveling system,Ensure four wheels rise and fall at the same time,Preprogrammed control may also be performed,Facilitating the regeneration operation of the road surface with the gradient。
And that work efficiency is high
● The working transmission system adopts a unique belt mechanical transmission form.,IncreaseVBelt wrap angle and belt automatic tension device,Ffectively prolong that service life of the belt,Compared with the traditional hydraulic transmission, the working efficiency is improved by 10%-15% 。
● Optimized tool placement,Imported cutter head is adopted。
Reliable performance
●Reinforced working reducer,Meet the requirements of the cold recycling machine to adapt to the recycling operation of stronger pavement base.。
●Hydraulic system components are international、Domestic well-known brands。
Convenient maintenance
●Open the hood door,The engine is visible、Hydraulic pump、Air Filter,And is convenient for daily maintenance、Maintenance
Product Parameter
Product model |
DGL700M |
Performance parameters |
|
Quality of work(kg) |
32200 |
Milling depth(mm) |
400 |
Milling width(mm) |
2300 |
Engine model |
QSK19-C700 |
Overall dimensions of the complete machine(mm) |
9290*3000*3160 |
Walking performance |
|
Working speed(m/min) |
0-15 |
Travel speed(km/h) |
0-50 |