Product Feature
Feature
Sakai patented compaction technologies
- SW652-1/-1k, standard model features 4,020vpm high frequency vibration by which can efficiently achieve the density faster and create smoother hot mix asphalt(HMA) mat.
- "B model", split drum type is also equipped with high frequency vibration and is easy to operate in the tight corner without pushing or shoving the material.
- On "ND model", oscillatory or circular (normal) vibration is selected by switch at operator station depending on the job conditions. The oscillatory vibration is good for thin lift and the circular vibration is effective for thick layer compaction.
Operators comfort
- Full view over drum surface, drum edge and sprinkler nozzles.
- Auto shut-off of water sprinkler when the Forward & Reverse lever is in the neutral position.
Easy Maintenance
- Rugged articulated centre-pin joint.
- Long life Sakai patented rubber isolators for drums.
Product Parameter
Specification
- *Specifications are subject change without notice.
- *Engine meets EPA standards.
- *Using low quality fuel may cause engine failure.
| MODEL | SW652-1 | SW652H-1 | SW652ND-1 | - | |
|---|---|---|---|---|---|
| SW652-1K | SW652H-1K | - | SW652NDH-1K | ||
| WEIGHTS | |||||
| Operating weight | kg(lb) | 6,820(15,035) | 7,720(17,020) | 7,120(15,700) | 7,780(17,150) |
| Load on front | kg(lb) | 3,290(7,255) | 3,740(8,245) | 3,440(7,585) | 3,770(8,310) |
| Load on rear | kg(lb) | 3,530(7,780) | 3,980(8,775) | 3,680(8,115) | 4,010(8,840) |
| DIMENSIONS | |||||
| Overall length | mm(in) | 4,300(169) | |||
| Overall width | mm(in) | 1,615(64) | |||
| Overall height | mm(in) | 2,795(110) | 2,805(110) | 2,795(110) | 2,805(110) |
| Wheelbase | mm(in) | 3,100(122) | |||
| ENGINE | |||||
| Make | KUBOTA | ||||
| Model | V3307-DI-T-KDN (Interim Tier4) (SW652-1 Series) | ||||
| Model | V3307-DI-T-E2B-RRSH1 (SW652-1K Series) | ||||
| Type | Diesel, Water cooled, 4 cycle, 4 cylinder, with turbo charger | ||||
| VIBRATING SYSTEM | |||||
| Transmission | Hydraulic | ||||
| Vibrator | Eccentric shaft type | ||||
