XCMG XR180DII Rotary Drilling Rig
Product Feature
It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability;
It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost;
Cummins electric control turbo-supercharged engine is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard;
Using full electronic control technology of CAN bus, Improves the reliability of the whole vehicle and simplify hydraulic line, Fully reflects the people, machine, electricity and liquid integration;
Winch-crowd and sleeve-driven functions are available for selection to CFA, hydraulic casing oscillator, DTH hammer satisfy various needs of the users;
It is equipped with a centralized lubrication system as standard configuration; maintenance is easier;
The machine obtains CE certfication of TüV Rheinland group.
Product Parameter
Project | Unit | Parameter |
Max.Drilling Diameter | ||
Uncased | (mm) | φ1600 |
Cased | (mm) | φ1300 |
Max.Drilling Depth | (m) | 60 |
Dimension | ||
Working condition L × W × H | (mm) | 8350×4200×20480 |
Transportation condition L × W × H | (mm) | 14255×2960×3450 |
Overall Drilling Weight | (t) | 57 |
Engine | ||
Model | - | CUMMINS QSB6.7-C260 |
Rated Power | (kW) | 194/2200 |
Hydraulic System | ||
Working pressure | (MPa) | 35 |
Rotary Drive | ||
Max. output torque | (kN.m) | 180 |
Rotary speed | (r/min) | 6~33 |
Spin off speed | (r/min) | 102 |
Pull-Down Cylinder | ||
Max.pull-down piston push | (kN) | - |
Max.pull-down piston pull | (kN) | - |
Max.pull-down piston stroke | (mm) | - |
Crowd Winch | ||
Max.pull-down piston push | (kN) | 210 |
Max.pull-down piston pull | (kN) | 210 |
Max. pull-down piston stroke | (mm) | 13000 |
Main Winch | ||
Max.pulling force | (kN) | 180 |
Max. single-rope speed | (m/min) | 65 |
Diameter of the steel wire rope | (mm) | 28 |
Auxiliary Winch | ||
Max. Pulling force | (kN) | 50 |
Max. single-rope speed | (m/min) | 70 |
Diameter of the steel wire rope | (mm) | 16 |
Drilling mast | ||
Left/right inclination of mast | (°) | 42432 |
Front inclination of mast | (°) | 5 |
Rotary table slewing angle | (°) | 360 |
Traveling | ||
Max. traveling speed | (km/h) | 2.3 |
Max.grade ability | (%) | 35 |
Crawler | ||
Track shoe width | (mm) | 700 |
Distance between tracks | (mm) | 2960~4200 |
The length of crawler | (mm) | 5140 |
Average ground pressure | (kPa) | 93.9 |