XCMG XR220D Rotary Drilling Rig
Product Feature
The machine adapt single row rope for main winch to figure out the wear of steel rope. and extend the life-span.
With infrared camera for observing main winch , Manipulator can observe the state of steel rope at day and night in cab.
Optional configuration according to customers' requirement (eg: support cylinder , automatic positioning of slewing , Crowd Winch tyro crowd winch CFA, hydraulic casing oscillator, DTH hammer ) Excellent expansibility.
Adopting the supercharged CUMMINS engine with European Ⅲ effluent standard. Meet environmental protection and energy conservation . Super power.
With the hydraulic pressure system adopted threshold power control and positive flow control, the system acquired high efficiency and higher energy conservation.
The patented parallelogram articulated structure actualizes a wider work range . The highly strengthened box-type steel structure design makes the mast of highly-rigidity and intensity , therefore the drill accuracy is heightened .
The machine has passed CE certification of TüV Rheinland group.
Standard centralized lubricating system, allowing easier maintenance.
Product Parameter
Project | Unit | Parameter |
Max.Drilling Diameter | ||
Uncased | (mm) | φ2000 |
Cased | (mm) | φ1700 |
Max.Drilling Depth | (m) | 80 |
Dimension | ||
Working condition L × W × H | (mm) | 10260×4400×22120 |
Transportation condition L × W × H | (mm) | 16355×3500×3510 |
Overall Drilling Weight | (t) | 70 |
Engine | ||
Model | - | CUMMINS QSL-325 |
Rated Power | (kW) | 242/2100 |
Hydraulic System | ||
Working pressure | (MPa) | 35 |
Rotary Drive | ||
Max. output torque | (kN.m) | 220 |
Rotary speed | (r/min) | 7~22 |
Spin off speed | (r/min) | 90 |
Pull-Down Cylinder | ||
Max.pull-down piston push | (kN) | 200 |
Max.pull-down piston pull | (kN) | 200 |
Max.pull-down piston stroke | (mm) | 5000 |
Crowd Winch | ||
Max.pull-down piston push | (kN) | - |
Max.pull-down piston pull | (kN) | - |
Max. pull-down piston stroke | (mm) | - |
Main Winch | ||
Max.pulling force | (kN) | 230 |
Max. single-rope speed | (m/min) | 70 |
Diameter of the steel wire rope | (mm) | 30 |
Auxiliary Winch | ||
Max. Pulling force | (kN) | 80 |
Max. single-rope speed | (m/min) | 60 |
Diameter of the steel wire rope | (mm) | 20 |
Drilling mast | ||
Left/right inclination of mast | (°) | 42464 |
Front inclination of mast | (°) | 5 |
Rotary table slewing angle | (°) | 360 |
Traveling | ||
Max. traveling speed | (km/h) | 1.5 |
Max.grade ability | (%) | 35 |
Crawler | ||
Track shoe width | (mm) | 800 |
Distance between tracks | (mm) | 3250~4400 |
The length of crawler | (mm) | 5715 |
Average ground pressure | (kPa) | 90 |