Engine
|
Engine model |
Cat C2.2(Turbine) |
Net flywheel power |
44.0 kW |
Total power(SAE J1995) |
44.9 kW |
Net power(ISO 9249) |
44.0 kW |
Displacement |
2.2 l |
Stroke |
100.0 mm |
Cylinder bore |
84.0 mm |
Net power(SAE J1349) |
44.4 kW |
Size(Approximation)*
|
Overhang length of the bumper behind the rear axle |
894.0 mm |
Reach at maximum lift and dump position |
653.0 mm |
Clearance at maximum lift and dump position |
2254.0 mm |
Caster angle at maximum height |
88.2° |
Bucket pin height in carry position |
214.0 mm |
Maximum unloading angle |
47.4° |
Maximum overall height |
3832.0 mm |
Bucket pin height at maximum lift height |
3001.0 mm |
Bucket pin extension at maximum lift height |
224.0 mm |
Departure angle |
27.9° |
Ground clearance |
170.0 mm |
Maximum reach with the arm parallel to the floor |
1249.0 mm |
Steering radius from center to rear of machine |
1513.0 mm |
Turning radius from center to connector |
1102.0 mm |
Steering radius from center to bucket |
1976.0 mm |
Height to top of cab |
2029.0 mm |
Vehicle width(Including tires) |
1497.0 mm |
Wheelbase |
1054.0 mm |
Length with bucket on the ground |
3233.0 mm |
Length(Bucket is not included) |
2523.0 mm |
Hydraulic system
|
Hydraulic flow – Standard:Hydraulic power(Calculated value) |
26.5 kW |
Hydraulic flow – Standard:Loader hydraulic pressure |
23000.0 kPa |
Hydraulic flow – Standard:Loader hydraulic flow |
69.0 l/min |
Hydraulic flow – High flow:Maximum loader hydraulic pressure |
23000.0 kPa |
Hydraulic flow – High flow:Maximum loader hydraulic flow |
99.0 l/min |
Hydraulic flow – High flow:Hydraulic power(Calculated value) |
38.0 kW |
Cab
|
ROPS |
ISO 3471:2008 |
FOPS |
ISO 3449:2005 I Level |
FOPS II Level |
ISO 3449:2005 II Level |
Power train
|
Travel speed(Forward or backward):Single speed |
12.3 km/h |
Travel speed(Forward or backward):Two-speed option |
17.8 km/h |
Maintenance refill capacity
|
Cooling system |
12.0 l |
Engine crankcase |
10.0 l |
Fuel tank |
57.0 l |
Hydraulic system |
45.0 l |
Hydraulic oil tank |
34.0 l |
Each side of the chain transmission case |
7.0 l |
Weight*
|
Notice |
*Operating weight、Operating specifications and dimensions are based on a weight of 75 kg(165 lb)The operator of、All fluids、Single speed、1524 mm(60")Dust-type bucket、Cat 10 × 16.5 tires、Standard flow hydraulic unit、C0 Cab(OROPS、Secure the seat)、880 CCA Battery、Manual quick coupler、No self-balancing、No optional counterweight(Unless otherwise noted)。 |
Operating weight |
2818.0 kg |
Working specifications*
|
Rated operating capacity |
839.0 kg |
Rated working capacity with optional counterweight |
885.0 kg |
Tilt cylinder digging force |
1807.0 kg |
Tipping load |
1679.0 kg |