Size（Approximation）*
|
| Overhang length of bumper behind rear axles |
1021.0 mm |
| Reach at maximum lift and dump position |
552.0 mm |
| Clearance at maximum lift and dump position |
2285.0 mm |
| Caster angle at maximum height |
87° |
| Bucket pin height in carry position |
200.0 mm |
| Maximum unloading angle |
52° |
| Maximum overall height |
3917.0 mm |
| Bucket pin height at maximum lift height |
3076.0 mm |
| Bucket pin extension at maximum lift height |
182.0 mm |
| Departure angle |
27° |
| Ground clearance |
222.0 mm |
| Maximum reach with the arm parallel to the floor |
1249.0 mm |
| Steering radius from center to rear of machine |
1639.0 mm |
| Turning radius from center to connector |
1314.0 mm |
| Steering radius from center to bucket |
2107.0 mm |
| Height to top of cab |
2111.0 mm |
| Vehicle width（Including tires） |
1676.0 mm |
| Wheelbase |
1105.0 mm |
| Length with bucket on the ground |
3487.0 mm |
| Length（Bucket is not included） |
2767.0 mm |
Hydraulic system
|
| Hydraulic flow – Standard：Hydraulic power（Calculated value） |
29.0 kW |
| Hydraulic flow – Standard：Loader hydraulic pressure |
23000.0 kPa |
| Hydraulic flow – Standard：Loader hydraulic flow |
76.0 l/min |
| Hydraulic flow – High flow：Maximum loader hydraulic pressure |
23000.0 kPa |
| Hydraulic flow – High flow：Maximum loader hydraulic flow |
112.0 l/min |
| Hydraulic flow – High flow：Hydraulic power（Calculated value） |
43.0 kW |
Cab
|
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 I Level |
| FOPS II Level |
ISO 3449:2005 II Level |
Power train
|
| Travel speed（Forward or backward）：Single speed |
12.1 km/h |
| Travel speed（Forward or backward）：Two-speed option |
18.5 km/h |
Maintenance refill capacity
|
| Cooling system |
14.0 l |
| Engine crankcase |
11.0 l |
| Fuel tank |
105.0 l |
| Hydraulic system |
50.0 l |
| Hydraulic oil tank |
39.0 l |
| Each side of the chain transmission case |
8.8 l |
Engine
|
| Engine model |
Cat C3.3B（Turbine） |
| Net flywheel power |
53.8 kW |
| Net power（ISO 9249）† |
55.4 kW |
| Total power（SAE J1995） |
53.8 kW |
| Displacement |
3.3 l |
| Stroke |
120.0 mm |
| Cylinder bore |
94.0 mm |
| Notice (1) |
†In line with the United States EPA Tier 2/European Union Stage II Equivalent emission standards（Not available in all regions）。 |
| Net power（SAE 1349）† |
54.3 kW |
| Net power（SAE 1349）†† |
54.2 kW |
| Net power（ISO 9249）†† |
54.8 kW |
| Notice (2) |
††In line with the United States EPA Tier 4 Interim/European Union Stage IIIA Equivalent emission standards（Not available in all regions）。 |
Weight*
|
| Notice |
*242D And 262D Operating weight of、Working specifications and dimensions are based on a weight of 75 kg（165 lb）The operator of、All fluids、Single speed、OROPS、1676 mm（66"）Dust-type bucket、Cat 12 × 16.5 tires、Standard flow hydraulic unit、Mechanical suspension seat、Without optional counterweight and manual quick coupler（Unless otherwise noted）。 |
| Operating weight |
3166.0 kg |
Working specifications*
|
| Rated operating capacity |
975.0 kg |
| Rated working capacity with optional counterweight |
1066.0 kg |
| Tilt cylinder digging force |
2283.0 kg |
| Tipping load |
1950.0 kg |
