GEHL V270 GEN:2 Skid Loaders
Height to Hinge Pin - Fully Raised (mm):
108.1" (2746)
Rated Operating Capacity (kg):
1,050 lbs. (476)
Net Power (kW):
33.1 hp (24.7)
Product Feature
The spacious operator’s compartment on the V270 GEN:2 Skid Loader is every operator’s dream.
- Level II FOPS is standard equipment.
- Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment.
- Extra-large side screens combined with a low-profilelift arm design provide a wide field-of-view to the side work areas.
- Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
- Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.
The Gehl V270 GEN:2 Skid Loader is ergonomically designed to reduce operator fatigue and increase productivity.
- T-Bar and dual-hand controls now available.
- Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
- Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
- Infinitely adjustable proportional auxiliary hydraulics.
- Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.
Emissions certified Tier IV engines combine power and efficiency on the V270 GEN:2 model.
- Engine consumes less fuel, making a positive impact on the bottom line.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- Engine has conventional water/ethylene glycol liquid-cooled design.
- Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Gehl parts and service support.
The V270 GEN:2 Skid Loader does not use the ordinary vertical-lift design. This loader’s lift arm is designed with the operator in mind.
- Low-profile lift arm design provides outstanding forward and side visibility.
- Self-leveling lift action provides better control of lifting loads.
- Heavy-duty timing link design, upper-rear channel support and large diameter pivot pins provide extra strength and rigidity to the lift arm, and exceptional rear visibility.
- Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
As with any Gehl loader, serviceability on the V270 GEN:2 Skid Loader is a snap.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Featured cab safety restraint bar for lifting ROPS/FOPS.
- Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
- Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
- Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- Coded wiring takes the guesswork out of electrical system identification.
Product Parameter
Make | Yanmar |
Model | 4TNV98CT-NMS Tier IV |
Net Power (kW) @ rpm | 70.7 hp (52.7) @ 2500 |
Maximum Torque (Nm) | 217 ft.-lbs. (294) @ 1625 |
Travel Speed - Max with 2-Speed Option (km/hr) | 11.9 mph (19.2) |
Auxiliary Hydraulics - Standard (L/min) | 23.5 gpm (89) |
High-Flow Hydraulics - Optional (L/min) | 35 gpm (132) |
System Relief Pressure (bar) | 3,200 psi (220.6) |
Reservoir Capacity (L) | 10.5 gal. (40) |
A | Augers |
B | Bale Movers |
C | Mini-Backhoes |
D | Pallet Forks |
E | Rakes |
F | Silage Defacer |
G | Stump Removal Bucket |
H | Trenchers |
Height to Hinge Pin - Fully Raised (mm) | 130" (3310) |
Dump Reach at Full Height (mm) | 32" (813) |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 167.4" |
B Height to Hinge Pin - Fully Raised | 130.3" |
C Overall Height to Top of ROPS | 81" |
D Ground Clearance to Chassis | 8.0" |
E Overall Length with Bucket | 148" |
F Overall Length without Bucket | 116.5" |
G Wheelbase | 49.5" |
H Dump Reach - Fully Raised | 32" |
I Rollback at Ground | 29° |
J Dump Angle | 42° |
K Overall Width | 69.5" |
L Bucket Width | 70" |
M Clearance Circle - Rear | 65.5" |
N Clearance Circle - Front without Bucket | 56" |
O Clearance Circle - Front with Bucket | 90" |
P Seat to Ground Height | 40" |
Q Rollback at Specified Height | 94° |
R Dump Height | 100" |
S Departure Angle | 25° |
Standard Specification Tire Size | 12.00 - 16.5 HD |
Engine |
|
Make | Yanmar |
Model | 4TNV98CT-NMS Tier IV |
Net Power @ rpm | 70.7 hp @ 2500 |
Gross Power @ rpm | 72 hp @ 2500 |
Displacement | 202.6 cu.in. |
Maximum Torque | 217 ft.-lbs. @ 1625 |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 23.5 gpm |
High-Flow Auxiliary Hydraulics - Option | 35 gpm |
System Relief Pressure | 3,200 psi |
Reservoir Capacity | 10.5 gal. |
Capacities/Weights |
|
Rated Operating CapacityA | 2,700 lbs. |
Fuel Tank | 24.5 gal. |
Travel Speed - Maximum | 7.4 mph |
Travel Speed with Two-Speed OptionB - Maximum | 11.9 mph |
Operating WeightC - Approximate | 8,150 lbs. |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 4252 mm |
B Height to Hinge Pin - Fully Raised | 3310 mm |
C Overall Height to Top of ROPS | 2057 mm |
D Ground Clearance to Chassis | 203 mm |
E Overall Length with Bucket | 3759 mm |
F Overall Length without Bucket | 2959 mm |
G Wheelbase | 1257 mm |
H Dump Reach - Fully Raised | 813 mm |
I Rollback at Ground | 29° |
J Dump Angle | 42° |
K Overall Width | 1765 mm |
L Bucket Width | 1778 mm |
M Clearance Circle - Rear | 1689 mm |
N Clearance Circle - Front without Bucket | 1422 mm |
O Clearance Circle - Front with Bucket | 2286 mm |
P Seat to Ground Height | 1016 mm |
Q Rollback at Specified Height | 94° |
R Dump Height | 2540 mm |
S Departure Angle | 25° |
Standard Specification Tire Size | 12.00 - 16.5 HD |
Engine |
|
Make | Yanmar |
Model | 4TNV98CT-NMS Tier IV |
Net Power @ rpm | 52.7 kW @ 2500 |
Gross Power @ rpm | 53.7 kW @ 2500 |
Displacement | 3.3 L |
Maximum Torque | 294 Nm @ 1625 |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 89 L/min |
High-Flow Auxiliary Hydraulics - Option | 132 L/min |
System Relief Pressure | 220.6 bar |
Reservoir Capacity | 40 L |
Capacities/Weights |
|
Rated Operating CapacityA | 1225 kg |
Fuel Tank | 72.7 L |
Travel Speed - Maximum | 12 km/hr |
Travel Speed with Two-Speed OptionB - Maximum | 19.2 km/hr |
Operating WeightC - Approximate | 3697 kg |
Control Patterns |
|
---|---|
Gehl T-Bar Controls | Optional |
Hand/Foot Controls | Optional |
Joystick Controls | Optional |
Dual-Hand Controls | Optional |
Engine |
|
Engine Auto-Shutdown System | Standard |
Engine Pre Heater | Standard |
Turbo-charged Engine | Standard |
Hydraulics |
|
Auxiliary Hydraulics | Standard |
High-Flow Auxiliary Hydraulics | Optional |
Operator Station |
|
Adjustable Arm Rests/Control Towers | Standard |
Air-Conditioning | Optional |
High Back Adjustable Seat | Standard |
Suspension Seat - Air Ride | Optional |
Suspension Seat - Mechanical | Optional |
Cab Enclosure | Optional |
Foot and Hand Throttles | Standard |
Full Instrumentation | Standard |
Heating | Optional |
Horn | Standard |
Integral Access Plate (Removable) | Standard |
Operator Restraint Bar | Standard |
ROPS/FOPS Level II Overhead Guard | Standard |
Sound Reduction Material | Standard |
Suspension Seat - Mechanical | Standard |
Work Lights - Front and Rear | Standard |
Performance |
|
All-Tach® Attachment Mounting System | Standard |
Power-A-Tach® Attachment Mounting System | Optional |
Electronic Attachment Control - 14-Pin Connector | Optional |
Anti-Vandalism Protection | Standard |
Back-Up Alarm | Optional |
Brake Control (Auto/Manual)/td> | Standard |
Counterweight | Optional |
Hydraglide™ Ride Control | Standard |
Hydraloc™ Safety System | Standard |
Hydrostatic Drive - Servo | Standard |
Lift Arm Support Device | Standard |
Self-Leveling Lift Action | Optional |
Two-Speed Drive | Optional |