Global-CE >
Skid Steer Loader >
Mustang Manitou Skid Steer Loader >
Mustang Manitou 2700V NXT2 Skid Loaders
Mustang Manitou 2700V NXT2 Skid Loaders
Lift Height:
130.3" (3310)
Capacity:
2700 lbs. (1225)
Power:
70.7 hp (52.7) @ 2500
Product Feature
- Emissions certified Tier IV engines combine power and efficiency.
- Self leveling lift action for better control of lifting loads.
- The chassis aids in superior weight distribution, which further enhances stability.
- Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
- A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
- Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.
- Level II FOPS is standard equipment.
- Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment.
- Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
- Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
- Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.
- T-Bar and dual-hand controls now available.
- Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
- Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
- Infinitely adjustable proportional auxiliary hydraulics.
- Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.
- Engine consumes less fuel, making a positive impact on the bottom line.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- Engine has conventional water/ethylene glycol liquid-cooled design.
- Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Mustang parts and service support.
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- Standard auxiliary detent allows the operator to set attachment for continuous operation.
- Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material at faster transport speeds.
- Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
- Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.
- Low-profile lift arm design provides outstanding forward and side visibility.
- Self-leveling lift action provides better control of lifting loads.
- Heavy-duty timing link design, upper-rear channel support and large diameter pivot pins provide extra strength and rigidity to the lift arm, and exceptional rear visibility.
- Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Featured cab safety restraint bar for lifting ROPS/FOPS.
- Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
- Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
- Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- Coded wiring takes the guesswork out of electrical system identification.
Product Parameter
| Dimensions | |
| A. Overall Operating Height - Fully Raised (mm) | 167.4" (4252) |
| B. Height to Hinge Pin - Fully Raised (mm) | 130.3" (3310) |
| C. Overall Height to top of ROPS (mm) | 81" (2057) |
| D. Ground Clearance to Chassis (mm) | 8" (203) |
| E. Overall Length with Bucket (mm) | 148" (3759) |
| F. Overall Length without Bucket (mm) | 116.5" (2959) |
| G. Wheelbase (mm) | 49.5" (1257) |
| H. Dump Reach at Full Height (mm) | 32" (813) |
| I. Rollback at Ground Level | 29° |
| J. Dump Angle | 42° |
| K. Overall Width (mm) | 69.5" (1661) |
| L. Bucket Width (mm) | 70" (1778) |
| M. Clearance Circle - Rear (mm) | 66.5" (1689) |
| N. Clearance Circle - Front w/o Bucket (mm) | 56" (1422) |
| O. Clearance Circle - Front w/Bucket (mm) | 90" (2286) |
| P. Seat to Ground Height (mm) | 40" (1016) |
| Q. Rollback at Full Height | 94° |
| R. Dump Height (mm) | 100" (2540) |
| S. Departure Angle | 27° |
| Standard Tire Size | 12.00 x 16.5 HD |
| Engine | |
| Make | Yanmar |
| Model | 4TNV98CT - Tier IV |
| Net Power (kW) | 70.7 hp (52.7) |
| Gross Power (kW) | 72 hp (53.7) |
| RPM for Optimal Power | 2500 rpm |
| Displacement (L) | 202.6 cu.in. (3.3) |
| Maximum Torque (Nm) @ rpm | 217 ft.-lbs. (294) @ 1625 |
| Hydraulics | |
| Auxiliary Hydraulics - Standard (L/min) | 23.5 gpm (89) |
| High-Flow Hydraulics - Optional (L/min) | 35 gpm (132) |
| High Flow System Pressure (bar) | 3,200 psi (220.6) |
| Reservoir Capacity (L) | 10.5 gal. (40) |
| Capacities/Weight | |
| Rated Operating Capacity (kg) | 2700 lbs. (1225) |
| Tipping Load (kg) | 5400 lbs. (2449) |
| Fuel Tank (L) | 24.5 gal. (72.7) |
| Travel Speed - Maximum (km/hr) | 7.4 mph (12) |
| Operating Weight - Approximate (kg) | 8,150 lbs. (3697) |
