Wolwa 3 ton lorry mounted crane
Product Feature
1. The drivers must pass a professional safety training, approved by the relevant departments of the inspection, get a certificate, then operate separately. Undocumented workers are strictly prohibited to use the equipment.
2. Before working, each operating device is to be checked: whether the rope is in line with safety rules, or braking and draulic devices is reliable. It is strictly prohibited to run in case of fault machine elements.
3. Lifting boom elevation shall not be less than 30 °, the crane in load cases should try to avoid ups and downs job. It is strictly prohibited to transform joystick before landing safely.
4. Drivers must be in close coordination with the rigger, obey the command signal of the rigger. Before operation, there must be a honk. When commanding gesture is not clear or error is found, the driver have the right to refuse to perform. The driver must stop the work immediately when there is emergency stop signal from someone, can continue to work to eliminate unsafe factors.
5. Must obey all traffic rules and regulations, drunk driving is forbidden. When driving, no smoking, eating and chatting.
6. When lifting a heavy piece, the distance between the weight lifting and the ground is about 10 centimeters. And check whether the the crane is stable and brake flexible and effective, then continue to work confirming everything is normal.
Product Parameter
Chassis | Tangjun ouling 3200(490 engine) |
Overall dimention | 5860*1915*2110mm |
Max. lifting torque | 42Kn.m |
Max. lifting capacity | 3000kg |
Max. working scope | 6.0m |
Amplitude | 0-70° |
Rotating angle | 360° |
Total weight | 2800kg |
Can be ordered as customer request in case of safety |