Engine |
Engine model |
Cat® C18 ACERT™ |
Flywheel power |
306.0 kW |
Cylinder bore |
145.0 mm |
Stroke |
183.0 mm |
Displacement |
18.1 l |
Notice (1) |
* Exclude all fan losses。 |
Notice (3) |
Nominal net power is when the engine is equipped with a fan running at maximum speed、Air Cleaner、Power at flywheel when silencer and alternator。 |
Notice (4) |
Elevation below 2286 m(7500')Time,Full power can be maintained。 Provide high altitude tooling,At altitudes above 2286 m(7500')Use when。 |
Net power SAE J1349/ISO 9249 |
306.0 kW |
Net engine power – SAE J1349/ISO 9249 |
306.0 kW |
Engine power - ISO 14396 |
329.0 kW |
Total engine power – SAE J1995* |
334.0 kW |
Discharge |
America EPA Tier 2/European Union Stage II Equivalent Emission Standards and U.S. EPA Tier 3/European Union IIIA Equivalent emission standards |
Weight |
Operating weight |
47872.0 kg |
Shipping weight |
35746.0 kg |
Gearbox |
First gear forward |
3.9 km/h |
Second gear forward |
6.8 km/h |
Third gear forward |
11.7 km/h |
Reverse first gear |
4.7 km/h |
Reverse second gear |
8.4 km/h |
Reverse third gear |
14.3 km/h |
First gear forward – Drawbar pull |
716500.0 N |
Second gear forward – Drawbar pull |
400500.0 N |
Third gear forward – Drawbar pull |
222500.0 N |
Hydraulic control unit
|
Pump type |
Flywheel drive piston pump |
Pump displacement(Turn) |
387.0 l/min |
Pump displacement(Tooling) |
226.0 l/min |
Tilt Cylinder Rod End Flow |
140.0 l/min |
Head End Flow of Tilt Cylinder |
188.0 l/min |
Dozer blade safety valve settings |
26200.0 kPa |
Tilt Cylinder Relief Valve Settings |
19300.0 kPa |
Ripper(Promote)Relief valve settings |
26200.0 kPa |
Ripper(Cutting angle)Relief valve settings |
26200.0 kPa |
Turn |
40500.0 kPa |
Fuel tank capacity |
89.0 l |
Chassis system
|
Type of track shoe |
Extreme operation |
Shoe width |
610.0 mm |
Number of track shoes per side |
43 |
Grouser height |
84.0 mm |
Pitch |
240.0 mm |
Ground contact area |
4.24 m² |
Number of track rollers per side |
8 |
Number of carrier rollers |
1 per side(Optional) |
Ripper – Adjustable parallel link single-toothed bar,Standard/Deep Ripping
|
Notice (2) |
Single Shank Ripper Arrangement weight includes pin puller。 |
Number of toothed bar holes |
3 |
Digging force |
332 kN/331 kN(74,637 lbf/74,412 lbf) |
Maximum clearance for lifting(Under the tooth tip,Fix with pin at the bottom hole) |
882 mm/817 mm(34.7"/32.2") |
Maximum penetration(Straight teeth) |
158 kN/172 kN(35520 lbf/38667 lbf) |
Maximum penetration depth(Standard tip) |
1231 mm/1727 mm(48.5"/68") |
Total width of the beam |
Not applicable |
Weight(With a toothed bar) |
4293 kg/4420 kg(9464 lb/9744 lb) |
Winch
|
Winch model |
PA140VS |
Weight* |
1790.0 kg |
Oil capacity |
15.0 l |
Increased dozer length |
557.0 mm |
Drum width |
320.0 mm |
Recommended Cable Diameter |
28.0 mm |
Optional cable diameter |
32.0 mm |
Maximum drum capacity – Recommended cable length |
78.0 m |
Maximum drum capacity – Optional cable length |
62.0 m |
Cable ferrule specification - Outside diameter |
60.0 mm |
Cable ferrule specification - Length |
70.0 mm |
Standard
|
FOPS |
Anti-falling object protection structures(FOPS,Falling Object Protective Structure)Conform ISO 3449:2005 II Level standard。 |
ROPS |
Caterpillar Supplied for this machine ROPS(Rollover Protective Structure,Roll-over protection structures)Conform ROPS Standard SAE J1040 MAY94,ISO 3471-1994。 |
Noise (1) |
For Caterpillar Cab provided,In the correct installation、Maintenance and with doors and windows closed,According to ANSI/SAE J1166 OCTOperator noise exposure levels as determined by the duty cycle procedures specified in(Equivalent sound pressure level)77 dB(A)。 |
Noise (2) |
According to SAE J88 APR95 prescribed test procedure,When the standard machine is running in mid-range gear,At a distance of 15 m(49')The exterior sound pressure level measured at is 87 dB(A)。 |
Size(Approximation)
|
Ground contact length of track |
3470.0 mm |
Track gauge |
2250.0 mm |
Width without trunnion(Standard track shoes) |
2880.0 mm |
Overall Length of Basic Dozer |
4910.0 mm |
Width(Outside of the trunnion) |
3300.0 mm |
Basic Dozer Length with Drawbar |
5180.0 mm |
Length of basic dozer with winch |
5545.0 mm |
Overall length(SU Shovel/SS Ripper) |
8230.0 mm |
Drawbar height(U Clamp center)* |
763.0 mm |
Ground clearance* |
596.0 mm |
Assembly SU Shovel length** |
6880.0 mm |
Assembly U Shovel length |
6967.0 mm |
Length for Single Shank Ripper Assembly |
6529.0 mm |
Length when assembling a multi-shank ripper |
6538.0 mm |
Height(FOPS Cab)* |
3820.0 mm |
Height(ROPS/Roof)* |
4000.0 mm |
Height(Top of the exhaust pipe)* |
3919.0 mm |
Maintenance refill capacity
|
Fuel tank |
889.0 l |
Cooling system |
101.0 l |
Engine crankcase* |
34.0 l |
Power train |
164.0 l |
Final drive(Each) |
15.0 l |
Roller frame(Each) |
45.0 l |
Pivot chamber |
30.0 l |
Notice |
* With oil filter。 |
Hydraulic tank oil(Only) |
89.0 l |
Ripper – Adjustable parallel link + Multi-toothed bar
|
Total operating weight*(Contain SU Shovel and Ripper) |
47872.0 kg |
Digging force(Multi-Shank Ripper with One Bucket Tooth) |
361.0 kN |
Maximum clearance for lifting(Under the tooth tip,Fix with pin at the bottom hole) |
879.0 mm |
Maximum penetration(Straight teeth) |
154.0 kN |
Maximum penetration depth(Standard tip) |
798.0 mm |
Total width of the beam |
1330.0 mm |
Weight(With a toothed bar) |
4153.0 kg |
Blade – 9SU
|
Ground clearance |
596.0 mm |
Blade – 9U
|
Capacity(SAE J1265) |
13.5 m³ |
Width(Outside the end edge) |
4310.0 mm |
Total operating weight**(Includes blade and single shank ripper) |
47872.0 kg |
Depth of excavation |
606.0 mm |
Maximum inclination |
940.0 mm |
Weight*(Hydraulic controls not included) |
6863.0 kg |
Height |
1934.0 mm |