Komatsu D65PXi-18 MID-SIZE DOZERS
Product Feature
Air Suspension Seat
New operator seat is equipped with lumbar support, tilting adjust function and electric heater. It is easy to adjust to the operator's shape and various working conditions and provides for comfortable operation. Also standard seat heat makes it possible to work comfortably in the winter.
Auto Idle Shutdown
Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The amount of time before the engine is shutdown can be easily programmed from 5 to 60 minutes.
Automatic shift mode
Select for all general dozing. When a load is applied, the transmission automatically shifts down, and when the load is off, it automatically shifts up to a set maximum gear speed. This mode economizes both fuel and production further when the torque converter lockup mechanism is actuated according to load, providing a one-to-one drive.
Automatic Transmission with Lockup Torque Converter
A significant reduction in fuel consumption and greater power train efficiency are achieved by the automatic transmission and lockup torque converter. The automatic transmission selects the optimal gear range depending on the working conditions and load placed on the machine. This means the machine is always operating at maximum efficiency. The lockup mechanism of the torque converter is automatically actuated to transfer engine power directly to the transmission in travelling and usual dozing speed ranges. Locking up the torque converter results in 10% improved drive train efficiency.
Cab Top GNSS Antenna
No blade mounted GNSS antenna(s), cables to worry about damaging with cab top GNSS antenna. Reduced risk of theft due to low visibility as viewed from ground level.
ECO Guidance
In order to support to optimum operation, the following 5 recommendations are displayed to improve fuel saving operation:
1) Avoid Excessive Engine Idling
2) Use Economy Mode to Save Fuel
3) Avoid Hydraulic Relief Pressure
4) Avoid Overload
5) Use Automatic Shift Mode
The operator can access the ECO guidance menu to check the Operation Records, Eco Guidance Records, and Average Fuel Consumption logs.
Enhanced Transmission Shifting
Select automatic or manual gearshift modes to suit the work at hand, thanks to Tier 4 Final improvements made to the shifting logic. The D65-18 machine now offers faster, smoother shifting in automatic mode. The ability to disable the auto downshift feature from the monitor in the manual shift mode empowers operators who prefer blade load control and shifting from a true manual mode. Operators now have full downshift control from the manual mode.
Hydrostatic Steering System (HSS)—Smooth, Powerful Turning
The engine power is transmitted to both tracks without power interruption on the inside track for smooth, powerful turns. Counter-rotation while in neutral is available for minimum turning radius providing excellent maneuverability.
Integrated ROPS Cab
The D65EX/PXi-18 has a strong integrated ROPS cab. High rigidity and superb sealing performance sharply reduce noise and vibration for the operator and helps prevent dust from entering the cab. This provides the operator a comfortable working environment. In addition, side visibility is increased because additional external ROPS structure and posts are not required. Outstanding visibility has been achieved.
Manual shift mode
The mode for dozing and ripping rough ground. When enabled, the transmission automatically shifts down when a high load is encountered, but does not shift up when the load is off. The operator can specify whether the auto shift down function is enabled or disabled in manual gearshift mode by selection in the monitor.
Palm Command Electronic Controlled Travel Control Joystick
Palm command travel joystick provides the operator with a relaxed posture and superb fine control without operator fatigue. Transmission gear shifting is simplified with thumb push buttons.
Power Angle Power Tilt Dozer
A power angle tilt dozer blade with highly durable boxstructure frame is available as an option. This blade is available for the PX machines. The hydraulic tilt and angle function expands versatility and productivity in a variety of applications.
Rear View Monitoring System
On the large LCD color monitor, the operator can view, through one camera, areas directly behind the machine. This camera can be synchronized with reverse operation.
Selectable Working Mode
Working mode P is the mode aiming for powerful operation and maximum production and mode E for general dozing applications with adequate speed and power while saving energy. For CO2 reduction and energy saving, the monitor panel allows for switching the working mode with ease, depending on the work at hand.
Standard High Debris Climate Control Package
The D65-18 offers improved heating and cooling performance in high debris applications. A wide core A/C condenser, cab air filter precleaner, and relocated coolant overflow tank are now standard to ensure reliable HVAC performance in high debris applications.
Stroke Sensing Hydraulic Cylinders
Robust stroke sensing hydraulic cylinders employ proven Komatsu sensor technologies for accurate finish grade performance. Stroke sensing angle cylinder allows machine control system to know the angle of the blade.
Engine
| Model | |
Komatsu SAA6D114E-6* |
| Type | |
4-cycle, water-cooled, direct injection |
| Aspiration | |
Komatsu variable geometry turbocharged, air-to-air aftercooled |
| Number of cylinders | |
6 |
| Bore x stroke | 114 mm x 144.5 mm | 4.49" x 5.69" |
| Piston displacement | 8.85 ltr | 540 in³ |
| Governor | |
All-speed and mid-range, electronic |
| Horsepower: | |
|
| SAE J1995 - Gross | 164 kW | 220 HP |
| ISO 9249 / SAE J1349 - Net | 162 kW | 217 HP |
| Rated rpm | |
1950 rpm |
| Fan drive type | |
Hydraulic |
| Lubrication system: | |
|
| Method | |
Gear pump, force lubrication |
| Filter | |
Full-flow |
| *EPA Tier 4 Final emissions certified | |
|
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank.
Piston type hydraulic pump with capacity (discharge flow) of
248 ltr/min 65.5 U.S. gal/min at rated engine rpm.
Service Refill Capacities
| Fuel tank | 415 ltr | 109.6 U.S. gal |
| DEF tank | 23.5 ltr |
6.2 U.S. gal |
| Coolant | 49 ltr | 12.9 U.S. gal |
| Engine | 30.5 ltr | 8.1 U.S. gal |
| Torque converter, transmission, bevel gear, and steering system | 48 ltr | 12.7 U.S. gal |
| Final drive (each side): | |
|
| D65EXi-18 |
16.5 ltr | 4.4 U.S. gal |
| D65PXi-18 | 22 ltr | 5.8 U.S. gal |
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Product Parameter
| Model | |
Komatsu SAA6D114E-6* |
| Type | |
4-cycle, water-cooled, direct injection |
| Aspiration | |
Komatsu variable geometry turbocharged, air-to-air aftercooled |
| Number of cylinders | |
6 |
| Bore x stroke | 114 mm x 144.5 mm | 4.49" x 5.69" |
| Piston displacement | 8.85 ltr | 540 in³ |
| Governor | |
All-speed and mid-range, electronic |
| Horsepower: | |
|
| SAE J1995 - Gross | 164 kW | 220 HP |
| ISO 9249 / SAE J1349 - Net | 162 kW | 217 HP |
| Rated rpm | |
1950 rpm |
| Fan drive type | |
Hydraulic |
| Lubrication system: | |
|
| Method | |
Gear pump, force lubrication |
| Filter | |
Full-flow |
| *EPA Tier 4 Final emissions certified | |
|
| Relief valve setting | 27.9 MPa / 285 kg/cm² | 4,050 psi |
| Control valves: | |
|
| Spool control valves for straight tilt dozer | |
|
| Positions: | |
|
| Blade lift | |
Raise, hold, lower, and float |
| Blade tilt | |
Right, hold, and left |
| Rear attachment | |
Raise, hold, and lower |
| Fuel tank | 415 ltr | 109.6 U.S. gal |
| DEF tank | 23.5 ltr |
6.2 U.S. gal |
| Coolant | 49 ltr | 12.9 U.S. gal |
| Engine | 30.5 ltr | 8.1 U.S. gal |
| Torque converter, transmission, bevel gear, and steering system | 48 ltr | 12.7 U.S. gal |
| Final drive (each side): | |
|
| D65EXi-18 |
16.5 ltr | 4.4 U.S. gal |
| D65PXi-18 | 22 ltr | 5.8 U.S. gal |
| Minimum turning radius: | |
|
| D65EXi-18 | 1.9 m | 6'3" |
| D65PXi-18 | 2.2 m | 7'3" |
| Travel speed | Forward | Reverse |
| 1st | 3.7 km/h 2.3 mph |
4.5 km/h 2.8 mph |
| 2nd | 5.6 km/h 3.5 mph |
6.7 km/h 4.2 mph |
| 3rdL | 7.3 km/h 4.5 mph |
8.7 km/h 5.4 mph |
| 3rd | 11.3 km/h 7.0 mph |
13.6 km/h 8.5 mph |
| Suspension | Oscillating equalizer bar and pivot shaft |
| Track roller frame | Monocoque, large section, durable construction |
| Rollers and idlers | Lubricated |
| Track shoes | Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun. |
