CAT CAT®973D Track loader
Operating mass of complete machine (kg):
28058.0
Rated bucket capacity (m ³):
3.21
Rated load (kg):
25400.0
Engine model:
Cat® C9 ACERT™
Product Feature
Product Parameter
Engine |
|
Flywheel power | 196.0 kW |
Engine model | Cat® C9 ACERT™ |
Net power - ISO 9249 | 196.0 kW |
Net power - SAE J1349 | 196.0 kW |
Net power - EEC 80/1269 | 196.0 kW |
Cylinder bore | 112.0 mm |
Stroke | 149.0 mm |
Displacement | 8.8 l |
Net power - Cat | 196.0 kW |
Chassis system |
|
Type of track shoe | Double gripper teeth for extreme operation |
Shoe width - Standard type | 550.0 mm |
Shoe width - Optional type | 675.0 mm |
Number of track rollers - Each side | 7 |
Number of track shoes - Each side | 40 |
Grounding track | 2930.0 mm |
Ground area - Standard track shoes | 3.22 m² |
Ground area - Optional track shoes | 3.96 m² |
Ground pressure - Standard track shoes | 85.5 kPa |
Ground pressure - Optional track shoes | 69.5 kPa |
Grouser height - Double Gripping Teeth | 49.0 mm |
Track gauge | 2160.0 mm |
Drive system |
|
Type | Hydrostatic drive,Machine speed infinitely variable,Up to 11 km/h(6.8 mph) |
Drive pump | Axial piston pump with two variable displacement slide |
Track motor | Two inclined-piston motors with variable displacement |
Maximum system pressure | 45000.0 kPa |
Hydraulic system - Implement |
|
Relief valve setting | 27500.0 kPa |
Cycle time - Lift | 6.5 seconds |
Cycle time - Unload | 1.4 seconds |
Float down | 2.7 seconds |
Output - Maximum value | 346.0 l/min |
Maintenance refill capacity |
|
Fuel tank | 621.0 l |
Cooling system | 44.0 l |
Crankcase(With filter) | 29.0 l |
Final drive(Each) | 28.5 l |
Hydraulic system(Equipment、Power Train and Tank) | 340.0 l |
Hydraulic oil tank | 189.0 l |
Pump drive box | 3.8 l |
Pivot | 3.0 l |
Electrical system |
|
Battery capacity | 1400 CCA |
Battery voltage | 12 |
Number of batteries | 2 |
Alternator | 95A Heavy-duty brushless |
Weight |
|
Operating weight | 28058.0 kg |
Shipping weight - Bucket is not included | 25400.0 kg |
Bucket |
|
Capacity - Universal type | 3.21 m³ |
Capacity - Multipurpose type | 3.05 m³ |
Bucket width - Universal type | 2910.0 mm |
Bucket width - Multipurpose type | 2868.0 mm |
Operating specifications |
|
Maximum travel speed | 11.0 km/h |
Ripper specifications |
|
Overall width/Beam | 2200.0 mm |
Cross-sectional area of toothed bar | 74 x 175 mm 2.9 x 6.9' |
Ground clearance | 888.0 mm |
Penetration | 397.0 mm |
Rip width | 1840.0 mm |
Cylinder - Cylinder bore | 130.0 mm |
Cylinder - Stroke | 236.0 mm |
Increase in machine length by ripper(In the transport position) | 586.0 mm |
Ground penetration | 100.0 kN |
Angle of slope | 28.5 degrees |
Ripper weight(3 toothed bars included) | 1700.0 kg |
Number of gear sets | 3 |
Standard |
|
ROPS/FOPS | ROPS/FOPS |
Brake | Brake |
Cab | Cab |