Mustang Manitou 1050RT Track Loaders
Lift Height:
109" (2769 mm)
Capacity:
1,050 lbs (476 kg)
Power:
35 hp (26 kW) @ 2800
Product Feature
- Tier IV-certified Yanmar diesel engines provide 35 hp (26 kW)
- The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
- Optional rear bumper/counterweight provides additional protection.
- Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
- Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
- Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
- Multi-purpose LCD display provides easy readout during operation.
- Easy Manager Telematics
- Cab forward design enhances the view to the bucket.
- Level II FOPS is standard equipment.
- Optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
- Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
- Optional pressurized sealed cab enclosure, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.
- Standard auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
- New cast-iron pump design delivers efficient flow at higher temperatures.
- Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
- Direct engine coupling provides high operating efficiency.
- Power track drive motors deliver superior pushing power.
- Auxiliary hydraulic quick couplers for fast, efficient attachment changes.
- Additional reach and increased dump height result in more efficient load placement and overall performance.
- Low-profile design provides outstanding forward, rear and side visibility.
- Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
- Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
- Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
- Large, gas-spring assisted engine cover and over-sized, allows full access on the rear of the machine for servicing and maintenance.
- Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
- Track rollers and idlers are sealed and require no maintenance.
- Coded wiring takes the guesswork out of electrical system identification.
Product Parameter
| Specifications | |
| Overall Operating Height - Fully Raised (mm) | 143.7" (3650) |
| Height to Hinge Pin - Fully Raised (mm) | 109" (2769) |
| Reach - Fully Raised (mm) | 26.5" (673.1) |
| Dump Angle - Fully Raised | 38° |
| Dump Height - Fully Raised (mm) | 84" (2134) |
| Maximum Rollback Angle - Fully Raised | 102° |
| Overall Height at ROPS (mm) | 71.5" (1816) |
| Overall Length with Bucket - w/o Counterweight (mm) | 117.5" (2985) |
| Overall Length without Bucket - w/o Counterweight (mm) | 88.9" (2258) |
| Specified Height (mm) | 57.7" (1466) |
| Reach at Specified Height (mm) | 39" (991) |
| Dump Angle at Specified Height | 72° |
| Maximum Rollback Angle at Ground | 32° |
| Carry Position (mm) | 5" (127) |
| Maximum Rollback Angle at Carry Position | 32° |
| Digging Position - Below Ground (mm) | 0 (0) |
| Angle of Departure with Standard Counterweight | 35° |
| Ground Clearance (mm) | 7.5" (191) |
| Track Gauge (mm) | 40.9" (1039) |
| Crawler Base (mm) | 50.5" (1283) |
| Overall Width - Less Bucket (mm) | 50.8" (1290) |
| Bucket Width (mm) | 54" (1372) |
| Clearance Radius - Front with Bucket (mm) | 73" (1854) |
| Clearance Radius - Rear without Counterweight (mm) | 50.8" (1290) |
| Capacity | |
| Operating Capacity at 35% of Tipping Load (kg) | 1,050 lbs. (476) |
| Operating Capacity at 50% of Tipping Load (kg) | 1,500 lbs. (680) |
| Operating Weight (kg) | 4,720 lbs. (2141) |
| Engine | |
| Make/Model | Yanmar/4TNV88C-KMS |
| Type | 4-Stroke Naturally Aspirated |
| Displacement (L) | 100 cu.in. (1.64) |
| Cylinders | 4 |
| Gross Horsepower (kW) @ 2800 rpm | 35 hp (26) |
| Peak Torque (Nm) @ 1820 rpm | 80 ft-lbs. (109) |
| Alternator Voltage/Amperage | 12V/55A |
| Track Drives | |
| Track Type | Rubber |
| Track Rollers | 3 |
| Roller Type | Steel |
| Track Width (mm) | 9.8" (250) |
| Ground Speed - Single Speed (km/h) | 6.3 mph (10.1) |
| Forces | |
| Bucket Breakout - Tilt Cylinder (kg) | 4230 lbs. (1919) |
| Bucket Breakout - Lift Cylinder (kg) | 5060 lbs. (2295) |
| Ground Speed - Single Speed (km/hr) | 6.5 mph (10.5) |
| Ground Speed - Two Speed (km/hr) | 10.0 mph (16.1) |
| Volume | |
| Fuel Tank (L) | 9.5 gal. (36) |
| Hydraulic Reservoir Tank (L) | 8 gal. (30) |
| Coolant Capacity (L) | 1.75 gal. (6.62) |
| Hydraulics | |
| Auxiliary Hydraulic Flow - Rated Speed (L/min) | 14.5 gpm (55) |
| High-Flow Hydraulic Flow - Rated Speed (L/min) | 28.28 gpm (195) |
| Battery | |
| Battery Volts | 12 V |
| Cold Cranking Amps at 0° F (-18° C) | 800 CCA |
| Sound & Vibration | |
| Sound Power (Environmental) | 101 dB(A) |
| Operator Ear | 85 dB(A) |
