Global-CE >
Crawler Loader >
Mustang Manitou Crawler Loader >
Mustang Manitou 2500RT NXT3 Track Loaders
Mustang Manitou 2500RT NXT3 Track Loaders
Lift Height:
128" (3251)
Capacity:
2,500 lbs. (1134)
Power:
70.7 hp (52.7) @ 2300
Product Feature
- Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
- Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
- Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
- Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
- Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
- Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
- Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
- Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
- Multi-purpose LCD display provides easy readout during operation.
- Single button allows simple scrolling and selection of various display functions.
- Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
- Joystick Sensitivity
- Position Reaction
- Engine Response
- AntiStall
- Pump Swash Plate Position
- Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
- Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.
- New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
- Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
- Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
- Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.
- Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
- New cast-iron pump design delivers efficient flow at higher temperatures.
- Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
- Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
- Powerful drive motors deliver superior pushing power to the tracks.
- Internal drive motor plumbing protects hoses, tubes and fittings from damage resulting from debris or objects in the track area.
- Power track drive motors deliver superior pushing power.
- Optional Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
- Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
- Additional reach and increased dump height result in more efficient load placement and overall performance.
- Low-profile design provides outstanding forward, rear and side visibility.
- Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
- Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
- Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
- Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
- Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
- Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
- Track rollers and idlers are sealed and require no maintenance.
- Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
- Coded wiring takes the guesswork out of electrical system identification.
Product Parameter
Specifications | |
Overall Operating Height - Fully Raised (mm) | 175.2" (4450) |
Height to Hinge Pin - Fully Raised (mm) | 128" (3251) |
Reach - Fully Raised (mm) | 39.2" (996) |
Dump Angle - Fully Raised | 41° |
Dump Height - Fully Raised (mm) | 98" (2489) |
Maximum Rollback Angle - Fully Raised | 102.5° |
Overall Height at ROPS (mm) | 83.1" (2111) |
Overall Length with Bucket - Standard Counterweight (mm) | 157.8" (4008) |
Overall Length without Bucket - Standard Counterweight (mm) | 126.8" (3221) |
Specified Height (mm) | 67.7" (1720) |
Reach at Specified Height (mm) | 31.3" (795) |
Dump Angle at Specified Height | 75° |
Maximum Rollback Angle at Ground | 30° |
Carry Position (mm) | 8.2" (208) |
Maximum Rollback Angle at Carry Position | 31.6° |
Digging Position - Below Ground (mm) | +0.5" (13) |
Angle of Departure with Standard Counterweight | 25° |
Ground Clearance (mm) | 13.2" (335) |
Track Gauge (mm) | 51.7" (1313) |
Track Shoe Width (mm) | 17.7" (450) |
Crawler Base (mm) | 61.5" (1562) |
Overall Width - Less Bucket (mm) | 69.5" (1765) |
Bucket Width (mm) | 83.9" (2131) |
Clearance Radius - Front with Bucket (mm) | 98.4" (2499) |
Clearance Radius - Rear with Standard Counterweight (mm) | 70.7" (1796) |
Maximum Rollback at Specified Height | 66.8° |
Angle of Approach | 90° |
Grouser Height (mm) | 1" (25) |
Capacity | |
Operating Capacity at 35% of Tipping Load (kg) | 2,500 lbs. (1134) |
Operating Capacity at 50% of Tipping Load (kg) | 3,571 lbs. (1620) |
Tipping Load (kg) | 7,143 lbs. (3240) |
Operating Weight (kg) | 11,470 lbs. (5203) |
Engine | |
Make/Model | Deutz/TD 3.6 Tier 4 |
Type | 4-Stroke Turbo |
Displacement (L) | 221 cu.in. (3.6) |
Cylinders | 4 |
Gross Horsepower (kW) @ 2300 rpm | 74.3 hp (55.4) |
Peak Torque (Nm) @ 1500 rpm | 243 ft-lbs. (330) |
Oil Pump Capacity (L) | 9 qts. (8.5) |
Alternator Voltage/Amperage | 14V/95A |
Track Drives | |
Drawbar Pull / Tractive Effort (kN) | 12,770 lbs. (5792) |
Track Type | Rubber |
Track Rollers | 5 |
Roller Type | Steel |
Track Width (mm) | 17.7" (450) |
Ground Pressure (bar) | 5.3 psi (0.37) |
Forces | |
Bucket Breakout - Tilt Cylinder (kg) | 8,384 lbs. (3803) |
Bucket Breakout - Lift Cylinder (kg) | 7,437 lbs. (3373) |
Ground Speed - Single Speed (km/hr) | 5.8 mph (9.3) |
Ground Speed - Two Speed (km/hr) | 8.2 mph (13.2) |
Volume | |
Fuel Tank (L) | 24 gal. (91) |
Hydraulic Reservoir Tank (L) | 13.8 gal. (52.2) |
Coolant Capacity (L) | 5.1 gal. (19.3) |
Hydraulics | |
Auxiliary Hydraulic Flow - Rated Speed (L/min) | 24.9 gpm (94.3) |
High-Flow Hydraulic Flow - Rated Speed (L/min) | 37.4 gpm (141.6) |
Transmission Pump Type | Axial Piston |
Motor Type | Axial Piston with Planetary Reduction |