SANY SMG200C-6 Heavy duty motor grader
Product Feature
◆Transmission Direct Drive Technology:Mechanical power shift gearbox,Front 8 and rear 6 working gears,And that transmission efficiency is high,The speed rigidity is good,The operation is powerful,Vehicle speed is high。
◆Engine variable power technology:According to different working conditions,The engine automatically matches the different power curves,Reduce fuel consumption,And that use cost is reduce。
◆Load-sensing hydraulic system:The work control hydraulic system distributes the flow as required according to the external load,The reaction speed is fast,Precise control,Reduce fuel consumption。
◆Intelligent fan cooling technology:Real-time detection of temperature of power system,Hydraulic motor stepless control fan speed,Low power consumption,Low noise。
◆Four-link swing frame:(Similar in construction to Carter Motor Grader),Large range of motion,The operation range is wide。
◆Overload protection worm gear box:When the operation is subjected to impact load,Overload protection is available,Reduce the impact received by the working device。
◆Roll type working device:Slewing bearing structure,Maintenance free,And that rotation precision is high,The advantages of finishing are more obvious.,The service life is more than 10000h。
◆Wear-resistant reinforced blade:Thickening、Widen the super wear-resistant main blade、Longer service life,Lower cost of use。
◆Intelligent control and display:SANY PLC andLYCLiquid Crystal Display,Multi-parameter and multi-language display,Fault self-diagnosis、Maintenance automatic prompt and other functions。
Product Parameter
Motive manufacturer |
Cummins USACummins |
Emission level |
TierⅢ |
Engine model |
QSC8.3-C205 |
Rated power |
153(kW) |
Rated speed |
1950(rpm) |
Peak Torque |
1010Nm |
Working quality of the whole machine |
16920(kg) |
Overall dimensions of the complete machine |
8946×2725×3353(mm) |
Front and rear axle distance |
6175(mm) |
Wheelbase of middle and rear wheels |
1524(mm) |
Minimum Ground Clearance |
370(mm) |
Number of gears |
Front 8 Back 6 |
Forward speed |
3.8/5.1/7.5/10.3/16.1/21.0/30.1/43.8(km/h) |
Reverse speed |
3.0/5.6/8.1/12.7/23.8/34.6(km/h) |
Front wheel steering angle |
Left 50°、Right 50° |
Front wheel tilt angle |
Left 17°、Right 17° |
Articulation steering angle |
Left 20°、Right 20° |
Front axle swing angle |
Up 16°、Down 16° |
Minimum Turning Radius |
7.4(m) |
Tyre type |
17.5-25-12(PR) |
Transmission Shift System Pressure |
2.2 ~ 3.0(MPa) |
Maximum volume of hydraulic oil tank |
120L |
Maximum volume of fuel tank |
380L |
Length × Chord height |
3660×620(mm) |
Maximum lifting height |
480(mm) |
Maximum cutting depth |
715(mm) |
Maximum angle of inclination |
±90(° ) |
Blade Flip Angle |
Front 40 back 5(° ) |
Turn around |
360(° ) |
Maximum buried depth |
470(mm) |
Maximum lifting height |
522(mm) |
Maximum departure angle |
22(° ) |
Maximum working width |
2300(mm) |
Maximum buried depth |
229(mm) |
Maximum lifting height |
614(mm) |
Maximum penetration angle |
63(° ) |
Maximum working width |
2740(mm) |