Engine
|
Engine model |
Cat C32 ACERT |
Cylinder bore |
145.0 mm |
Stroke |
162.0 mm |
Displacement |
32.1 l |
Notice (1) |
Power rating for 1750 rpm under specified conditions as required by the specified standard rpm Test conditions at。 |
Notice (2) |
Ratings are based on SAE J1995 Standard Air Conditions:Temperature 25°C(77°F),Air pressure 100 kPa(29.61 Hg)。 Power is based on the following condition:Fuel at 16°C(60°F)Time API The degree is 35,The lower calorific value of fuel oil is 42780. kJ/kg(18390 BTU/lb),And the engine operating temperature is 30°C(86°F)。 |
1300 rpm Net torque at |
4757.0 N·m |
Net power - SAE J1349 |
708.0 kW |
Net torque reserve |
23% |
Engine power - ISO 14396 |
749.0 kW |
Engine speed |
1750.0 turn/Minutes |
Total power - SAE J1995 |
758.0 kW |
Cylinder |
12 |
Discharge (1) |
In line with the United States EPA Tier 2 Equivalent Emission Standard。 |
Discharge (2) |
Certified by China's third emission standard for non-road countries。 |
Notice (3) |
Altitude up to 3048 m(10000')The engine can still maintain its rated power.。 |
Operating specifications
|
Nominal Payload Level(100%) |
97.98 ton (US) |
Top speed - Fully loaded |
65.9 km/h |
Gearbox
|
First gear forward |
10.7 km/h |
Third gear forward |
19.8 km/h |
Fifth gear forward |
36.2 km/h |
Seventh gear forward |
65.9 km/h |
Notice |
Equipped with standard 27.00R49(E4)Maximum travel speed of the tire。 |
Reverse first gear |
12.1 km/h |
Final drive
|
Differential gear ratio |
2.74:1 |
Planetary gear ratio |
7.00:1 |
Total reduction ratio |
19.16:1 |
Brake
|
Brake standard |
ISO 3450:2011 |
Front OCDB Braking surface area |
40846.0 cm² |
Front caliper braking surface area |
2787.0 cm² |
Braking area - Rear brake |
102116.0 cm² |
Body lift system
|
Pump flow – High idle |
491.0 l/min |
Body raise time – High idle |
15.0 seconds |
Weight distribution - Approximation
|
Front axle – No load/Fully loaded |
44%/30% |
Rear axle – No load/Fully loaded |
56%/70% |
Suspension system
|
The rear axle swings |
5.4° |
Effective cylinder stroke – Front |
318.0 mm |
Effective cylinder stroke – Rear |
165.0 mm |
Maintenance refill capacity
|
Fuel tank |
1140.0 l |
Cooling system |
212.0 l |
Torque converter/Brake/Lift Hydraulic Tank |
385.0 l |
Transmission system |
122.0 l |
Differential |
222.0 l |
Crankcase |
113.5 l |
Final drive(Each) |
42.0 l |
Steering system(Including the fuel tank) |
59.0 l |
Tire
|
Standard Tyre |
27.00R49(E4) |
ROPS
|
ROPS |
Caterpillar Roll-over protection structure provided(ROPS,Rollover Protective Structure)The cab is in line ISO 3471:2008 Operator Seat Standard and ISO 13459:2012 Trainer Seat Standard。 |
FOPS |
Anti-falling object protective structures(FOPS,Falling Objects Protective Structure)Conform ISO 3449:2005 Operator Seat Standard and ISO 13459:2012 II Level FOPS Trainer seat standard。 |
Noise
|
Noise standard |
ISO 6393:2008、SAE J1166:2008 |
Turn
|
Steering Standard |
ISO 5010:2007 |
Steering angle |
30.5° |
Turning diameter - Front wheel |
25.3 m |
Circle clearance diameter |
28.4 m |
Capacity — X Type a body — 100% Fill factor
|
Stacking 2:1(SAE) |
60.1 m³ |
Paperback |
42.1 m³ |
Size(Approximation)– X Type a body
|
Width between center lines of front tire |
4163.0 mm |
Overall width of front tire |
4961.0 mm |
Front headliner height - Load |
5177.0 mm |
Unloading clearance |
890.0 mm |
Engine guard clearance |
864.0 mm |
Width between center lines of rear dual tire |
3576.0 mm |
Distance between rear axle and tail |
3045.0 mm |
Rear axle clearance |
902.0 mm |
Working width |
6105.0 mm |
Total length |
10004.0 mm |
Total height - The body is raised |
10050.0 mm |
Working width of the extended walkway |
6545.0 mm |
Ground clearance |
896.0 mm |
To ROPS The height of the top - Load |
4730.0 mm |
Loading height - No load |
4380.0 mm |
Inside body width |
5200.0 mm |
Inside body length |
6870.0 mm |
Maximum Inside Body Depth |
1895.0 mm |
Outside width of body |
5524.0 mm |
Overall body length |
9555.0 mm |
Overall tire width |
5262.0 mm |
Wheelbase |
4570.0 mm |
Overall width of headliner |
6056.0 mm |
Weight:X Type a body – Without backing plate
|
Target payload |
98202.0 kg |
Target Total Machine Weight |
163360.0 kg |
Unloaded operating weight |
65158.0 kg |
Weight of the body system |
16070.0 kg |