SANY SMHC50-D Electric steel (material) grabbing machine
Product Feature
Faster
Equipped with Kawasaki large displacement main pump、High efficiency main valve and reducer,Achieve fast operation。
Turn fast:Up to 8 turns in 1 minute
The cycle is fast:One operation cycle can be less than 30s
Catch it fast:Gripper opening shortened to 1.3s
Higher
It's high enough:Grasping tip bottom height up to 13.2 meters,On the mounting hinge point of the boom、The next two purposes。Grasp depth of upper hinge point,Grab height of lower hinge point;Grasp deep、Grasp both high and high。
Look high:Horizontal view up to 5.6 meters,The cab adopts a single four-bar linkage lifting mechanism.,Lift height 2.65m,Wide field of view,Shipment、Both loading are correct.。
Stronger
Powerful:Configuration 160kWElectric machinery,Powerful
Strong structure:Chassis、The key components of the boom are free of cracking for 20,000 hours.。The chassis adopts the mature chassis of Sany Big Dig.,Live verification of excavator,The structure is reliable。Boom adoptsHG70/785 high strength steel、High strength。
More economical
Cost saving:Motor drive,Zero emission,Less maintenance,Green is more economical.。Electric energy monitoring is adopted,The display screen is presented in real time,Operation power consumption can be seen。50% cost savings over conventional internal combustion power%。
Product Parameter
Basic configuration |
|
Motor |
Three-phase asynchronous motor |
Rated power of motor |
160/1485kW/rpm |
Motor voltage |
380V,50Hz |
Starting type |
Soft start |
Power cable |
YCW3×95+2×35,100m |
Complete machine parameters |
|
Weight of complete machine |
48.5t |
Total length(Boom is not included) |
7.856m |
Overall width(Boom is not included) |
3.19m |
Total height(Boom is not included) |
3.4m |
Lifting structure type of cab |
Four-link lifting mechanism |
Cab lift height |
2.65m |
Cab view height |
2.78-5.43m |
Track gauge |
2.59m |
Track track width |
4.14m |
Track width |
0.6m |
Track-type chassis structure |
Conventional track chassis |
Performance parameters |
|
Swing speed |
0~8r/min |
Turning radius of upper tail |
3.55m |
Gradeability |
40% |
Travel speed |
4.8km/h |
Boom |
|
Boom length |
8.6m |
Arm length |
6m |
Working radius |
4.5~13.5m |
Operating altitude |
13.5m |
Depth of operation |
-6m |
Gripper |
|
Gripper type |
Plum blossom grab |
Gripper model |
SLM1004A.0 |
Gripper capacity |
1m³ |