Products Center
More Products
Global-CE > Paver > Cat Paver > CAT Cat®AP655F Rubber crawler paver
CAT Cat®AP655F Rubber crawler paver

CAT Cat®AP655F Rubber crawler paver

Basic paving width (m):
3
Maximum paving width (m):
10
Paving speed (m/min):
64
Maximum paving thickness (mm):
305
Theoretical paving capacity (t/H):
1300
Hopper capacity (t):
7.1
Engine model:
Cat C7.1
Engine power (kw):
151
View Complete Details

Product Feature

● Fuel efficient and quiet

CAT C7.1 Engine

C7.1Engine provides 151 kW(205 hp)The power of,In line with the United States EPA Tier 3 and EU Stage IIIA Equivalent emission standards。

Fuel saving mode

The engine speed in economy mode is 1650 rpm,Thereby reducing fuel consumption.,Reduced noise level。 The machine is designed to operate in a fuel-efficient mode,Suitable for most applications。

Automatic control function of engine speed

When automatic engine speed control is enabled,The engine speed will decrease to 1000 when the propel lever is moved into neutral rpm Idle speed,Or 1300 when screed heating is enabled rpm。

Advanced Fuel Economy Mode

The simultaneous activation of Economy Mode and Automatic Engine Speed Control changes the engine speed according to the load factor。 If enabled,The engine will be paved at 1650 rpm Run at the speed of。 If the upper power limit is exceeded,The engine speed will increase to 2200 rpm And remain unchanged.,Until the demand falls below the upper limit for 30 second,This ensures reliable performance。

● Quick starting device

Quiet heating

Quiet heating mode at 1300 rpm Operate at engine speed of,And provide heating within 15 minute。

Fast heating

When equipped with a wide paving kit,Rapid heating mode for rapid heating in 35 minutes。 When the screed is at the standard telescoping width,Fast heating is no faster than quiet heating.。

Temperature range

Three preset heating options provide a wide range of temperatures for various mix designs;The low temperature is 110°C Or 230°F,The medium temperature is 130°C Or 266°F,The high temperature is 160°C Or 320°F。

● More comprehensive control

The view is wider,Better comfort

Dual independent operator stations can extend out of the rack,Have a good all-round view。 Compact front-loading cooling system improves forward visibility,The redesigned auger assembly optimizes the visibility of the material height in front of the screed。 Heated seat option、Seat multi-way adjustment and tilt console,Keep operators comfortable throughout the day。 The top-mounted cooling system can make the smoke、Keep hot air and fan noise away from cooler operator,And provide a quieter working environment。

Smoke management

Proprietary ventilation system draws smoke out of the conveyor tunnel and auger chamber,Keep it away from the operator,This creates a more comfortable working environment for the operator。

● Waterproof display

Simple technology

Technology helps operators perform better。 Intuitive symbols and large graphics simplify operation,But through interactivity LCD Touch the display to access the generator start、Screed temperature control and mix height adjustment,And that efficiency is improve。

One-touch operation

By mean of a feeding system for automatic refilling、One-touch function for feed system activation and hopper control,Operators are able to focus on other tasks,So that that efficiency is improve。

● Improve efficiency

Automatic filling type feeding system

The self-priming feed system allows the conveyor and auger to work alternately,Until the mixture height reaches the sensor set point,Eliminates manual enablement and continuous monitoring,Thereby simplifying the process.。

One-touch feeding system

Push the button to activate both augers and both conveyors simultaneously,This simplifies the setup。 When needed,Each auger and each conveyor can be operated separately。

Single Touch Hopper Control

Just touch the button and release it,Hopper wing plate and hydraulic hopper door can be folded。 The system can be customized,In order to activate the left or right wing separately or simultaneously、Or hydraulic front hopper door。

Cleaning and preheating mode

This function starts the auger at a low speed、Conveyor and tamper bar(If equipped),Ability to spray release agent to prevent material build up。

Mixture height adjustment

When needed,From the tractor LCD Change the mix height in front of the screed on the display,Thereby increasing versatility.。

Hydraulic main frame extension plate

Optional 457 mm(18")The hydraulic main frame extension plate is attached to the auger assembly,The material can smoothly flow to the expander.。 When reducing the paving width,They can be retracted with the screed extension。

Multi-feed sensor option

The feeding system can be customized,For automatic operation without or with 2 or 4 feed sensor。 When paving without sensors due to failure,Simply set the feed system to“Automatic”And adjust that setting of the mixture height,Eliminates the need to cycle manual switches as in previous model。

Maintenance is more convenient

Base plate without fasteners simplifies replacement,The bottom side fasteners of the chain guard prevent bolt wear and material accumulation,And is convenient to replace。

● MOBIL-TRAC Chassis system

Performance

Mobil-Trac The undercarriage minimizes the movement of the tow point。 Front、The rear bogie group can climb over obstacles.,Maintain good grounding。 The smooth track option excels when driving on soft roadbeds and fresh asphalt。 Pattern design in soft paving/Excellent performance under road conditions。

Durability

Self-tensioning accumulator、Center guide block and strong internal track cable ensure excellent durability。 Components are rubber-coated,O as to push the asphalt,Prevent accumulation。

● SE Series screed

Screed heating technology

Proprietary temperature zone monitoring allows heating to continue in the event of a temperature sensor failure。 The system also monitors the failure of the heating element,Eliminates unnecessary replacement。

Easily adjusted

The screed's feed system rate adjustment provides versatility。 Extender height、Standard hydraulic adjustment for grade and camber,Allows adjustment during driving at standard and maximum paving width。

Two-speed extender control

Proprietary two-speed proportional expander control,Speed can be reduced when paving width is extended,So that accurate control and quick reaction can be carry out around an obstacle。

And is convenient to replace

The heating element can slide out,Easy to replace,No need to remove the screed。 Machined screed frame simplifies screed replacement and leveling。

Tamper screed option

Screed with tamper bar for increased density,Because it causes the material to gather under the screed。 2 mm、4 mm And 7 mm Three stroke settings provide versatility,And has 700 to 1800 rpm Variable tamper bar speed range。

Wide paving kit

Proprietary Power Controls Simplify Entire 10.0 m(33'4")Adjustment of paving width,Better texture and quality of the paving layer。 Innovative design uses spreader slope to connect wide paving kits,No additional lifting equipment is required。

● CAT Grade Control

The operation is simple

F Series pavers can be operated from either of two tractor or two screed console Cat Grade Control。 Split screen mode can be set to monitor each side of the screed,To allow for single-person operation。

Precise control

The control is more precise,And that utilization rate of the mixture is improve to the maximum extent.,And that cost is save。 By an acoustic wave sensor using 5 sensor,Discard two readings and average the remaining three reading,Thus achieving a true average。 10-point automatic calibration,Eliminates single calibration point overshoot/Too low problem。 Cross connections are used,Adjust the height to keep the slope and elevation constant。 Real 9 m(30')Sonic Balance Bar,You can make the movement of the tow point account for 1% of the total slope deviation/3。

Highly reliable

Waterproof display、Factory-installed components and consistent wiring provide excellent performance。 The sealing components are heat resistant、Damp-proof and vibration-proof,Built-in temperature sensor has better reliability than shackle type sensor。

Product Parameter

 

Weight

 

Operating weight - Paver only

15584 kg

Operating weight - Only SE60 V Screed

3400 kg

Operating weight - Only SE50 VT Screed

3340 kg

Shipping weight - Paver only

15297 kg

Operating weight - Only SE60 V XW Screed

4070 kg

Operating weight - Only SE60 VT XW Screed

4490 kg

Operating weight - Only SE50 V Screed

3284 kg

Working specifications

 

Standard paving range - SE60 V、

SE60 V XW、SE60 VT XW

3.0-6 m(9' 10" - 19' 6")

Maximum paving speed - With vibrating screed

64 m/min

Maximum travel speed

14.5 km/h

Inside turning radius

0.5 m

Maximum paving speed - Screed with tamper bar

25 m/min

Maximum paving width - SE50 V

6.5 m

Hopper capacity

7.1 m³

Maximum throughput capacity

1300 tonnes/hr

Maximum paving width -

SE60 V XW、SE60 VT XW

10 m

Maximum paving width - SE60 V

7.65 m

Maximum paving width - SE50 VT

8 m

Standard paving range - SE50 V、SE50 VT

2.55-5 m(8' 4" - 16' 4")

Engine

 

Total power

151 kW

ENGINE

 

Engine model

Cat C7.1

SERVICE REFILL CAPACITIES

 

Fuel tank capacity

278 l

Service refill capacity

 

DEF Box

19.1 l

Send Inquiry

Connect with Cat
I want quotes for
Email ID
Your Country is
Please select
Name
Phone Number
- -
SUBMIT
Connect with Cat
I want quotes for
Email ID
Your Country is
Please select
Name
Phone Number
- -
SUBMIT

Related products that may lnterest you

Paver related brands

Copyright Notice © 2002-2024 global-ce.com