XCMG XR120D Rotary Drilling Rig
Product Feature
It introduces the back-inclination large triangle structure with stationary luffing support, which is suitable for working conditions of low-tonnage drilling rig, improving the rigidity of working mechanism and enhancing the stability of whole drilling rig while achieving easy transportation;
The imported Kawasaki hydraulic parts can achieve reasonable powertrain matching and high construction efficiency;
The imported Cummins engine can minimize fuel consumption with the help of two optional accelerator control modes;
The working amplitude of auxiliary winch is increased, which can hoist light and small objects and save cost as well;
The main winch is designed with a high displacement motor, achieving more sensitive response and more reliable working and also getting rid of the difficulty in earth dumping for pile holes of small diameter;
The standard reducer joint can adjust drill rod combination according to actual conditions, thus effectively reducing fuel consumption and improving construction efficiency;
It introduces the proprietary intelligent control system, CAN bus and PLC, including automatic/manual adjustment of drilling mast verticality, depth automatic detection and display, intelligent fault diagnosis and control.
Product Parameter
Project | Unit | Parameter |
Max.Drilling Diameter | ||
Uncased | (mm) | φ1300 |
Cased | (mm) | - |
Max.Drilling Depth | (m) | 44 |
Dimension | ||
Working condition L × W × H | (mm) | 7175×3400×16800 |
Transportation condition L × W × H | (mm) | 12580×3400×3360 |
Overall Drilling Weight | (t) | 40 |
Engine | ||
Model | - | CUMMINS B5.9-C |
Rated Power | (kW) | 112/1950 |
Hydraulic System | ||
Working pressure | (MPa) | 32 |
Rotary Drive | ||
Max. output torque | (kN.m) | 120 |
Rotary speed | (r/min) | 6~28 |
Spin off speed | (r/min) | - |
Pull-Down Cylinder | ||
Max.pull-down piston push | (kN) | 120 |
Max.pull-down piston pull | (kN) | 120 |
Max.pull-down piston stroke | (mm) | 3500 |
Crowd Winch | ||
Max.pull-down piston push | (kN) | - |
Max.pull-down piston pull | (kN) | - |
Max. pull-down piston stroke | (mm) | - |
Main Winch | ||
Max.pulling force | (kN) | 100 |
Max. single-rope speed | (m/min) | 70 |
Diameter of the steel wire rope | (mm) | 24 |
Auxiliary Winch | ||
Max. Pulling force | (kN) | 45 |
Max. single-rope speed | (m/min) | 70 |
Diameter of the steel wire rope | (mm) | 16 |
Drilling mast | ||
Left/right inclination of mast | (°) | 42432 |
Front inclination of mast | (°) | 5 |
Rotary table slewing angle | (°) | 360 |
Traveling | ||
Max. traveling speed | (km/h) | 3.2 |
Max.grade ability | (%) | 40 |
Crawler | ||
Track shoe width | (mm) | 700 |
Distance between tracks | (mm) | 3400 |
The length of crawler | (mm) | 3650 |
Average ground pressure | (kPa) | 73.6 |