GEHL R190 Skid Loaders
Product Feature
The new R190 has a spacious operator station with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl.
- Large Level II ROPS/FOPS is standard equipment.
- New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
- Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas.
- Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment.
Controls on the R190 incorporate intuitive design, state-of-the-art technology and plenty of options to suit the preference of any operator.
- Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
- Auxiliary controls are located on the control grip in all control configurations for easy access.
- Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
- Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
The R190 is equipped with a top-of-the-line Yanmar Tier IV engine that meets emissions standards and provides the muscle needed to tackle demanding jobs with ease.
- The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
- The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
- Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
The R190 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
- Impressive breakout forces deliver optimal digging and lifting performance.
- Improved cycle times increase productivity on the jobsite.
- Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
- HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
The R190 is built with a robust, radial lift arm that incorporates performance and durability.
- Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
- Between the tire design keeps the machine length short and compact.
- Gehl PowerView® low-profile boom design offers optimal side-to-side visibility.
Excellent service access and quality components pair up to provide durable machines that are easy to maintain.
- Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
- ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- All high-rotation pins have grease points for ease of maintenance.
- Features such as the remote oil drain and filter provide simple and easy maintenance access.
Product Parameter
Net Power (kW) | 68.4 hp (51) |
Maximum Torque (Nm) | 173 ft.-lbs. (235) |
Rated Operating Capacity (kg) | 1,900 lbs. (862) |
Make | Yanmar |
Model | 4TNV98C-NMS Tier IV/Stage 3B |
Net Power (kW) @ rpm | 68.4 hp (51) @ 2500 |
Maximum Torque (Nm) @ rpm | 173 ft.-lbs. (235) @ 1625 |
Displacement (L) | 202.6 cu.in. (3.3) |
Auxiliary Hydraulics - Standard (L/min) | 18.5 gpm (70) |
High-Flow Auxiliary Hydraulics - Option (L/min) | 31.5 gpm (119) |
Reservoir Capacity (L) | 8 gal. (30.3) |
A | Bale Movers |
B | Brooms |
C | Grapples |
D | Pallet Forks |
E | Mower, Rotary |
F | Skeleton Rock Bucket |
G | Stump Grinders |
H | Tree Puller/Grabbing Tool |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 158" |
B Height to Hinge Pin - Fully Raised | 120.5" |
C Overall Height to Top of ROPS | 80" |
D Ground Clearance to Chassis | 6.5" |
E Overall Length with Bucket | 127" with 66" Bucket |
F Overall Length without Bucket | 94" |
G Wheelbase | 42" |
H Dump Reach - Fully Raised | 22.5" |
I Rollback at Ground | 26° |
J Dump Angle | 42° |
K Overall Width | 66.5"/64.5"A |
L Bucket Width | 66" |
M Clearance Circle - Rear | 58.5" |
N Clearance Circle - Front without Bucket | 44.5" |
O Clearance Circle - Front with Bucket | 79" |
P Seat to Ground Height | 39" |
Q Rollback at Specified Height | 96° |
R Dump Height | 91" |
S Departure Angle | 25° |
Standard Specification Tire Size | 10.00 x 16.5 HD |
Engine |
|
Make | Yanmar |
Model | 4TNV98C-NMS Tier IV/Stage 3B |
Gross Power @ 2500 rpm | 69.3 hp |
Net Power @ 2500 rpm | 68.4 hp |
Maximum Torque | 173 ft.-lbs @ 1625 |
Displacement | 202.6 cu.in. |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 18.5 gpm |
High-Flow Auxiliary Hydraulics - Option (L/min) | 31.5 gpm |
Reservoir Capacity (L) | 8 gal. |
Electrical System |
|
Battery | 12-volt |
Starter | 12-volt |
Alternator | 95-amp |
Capacities/Weights |
|
Rated Operating CapacityB | 1,900 lbs. |
Rated Operating Capacity with Optional CounterweightB | 2,110 lbs. |
Fuel Tank | 16.5 gal. |
Travel Speed - Maximum | 7.5 mph |
Travel Speed with Two-Speed Option - Maximum | 12.5 mph |
Operating WeightC - Approximate | 6,880 lbs. |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 4013 mm |
B Height to Hinge Pin - Fully Raised | 3061 mm |
C Overall Height to Top of ROPS | 2032 mm |
D Ground Clearance to Chassis | 165 mm |
E Overall Length with Bucket | 3226 mm |
F Overall Length without Bucket | 2388 mm |
G Wheelbase | 1067 mm |
H Dump Reach - Fully Raised | 572 mm |
I Rollback at Ground | 26° |
J Dump Angle | 42° |
K Overall Width | 1689mm/1638 mmA |
L Bucket Width | 1676 mm |
M Clearance Circle - Rear | 1486 mm |
N Clearance Circle - Front without Bucket | 1130 mm |
O Clearance Circle - Front with Bucket | 2007 mm |
P Seat to Ground Height | 991 mm |
Q Rollback at Specified Height | 96° |
R Dump Height | 2311 mm |
S Departure Angle | 25° |
Standard Specification Tire Size | 10.00 x 16.5 HD |
Engine |
|
Make | Yanmar |
Model | 4TNV98C-NMS Tier IV/Stage 3B |
Gross Power @ 2500 rpm | 51.7 kW |
Net Power @ 2500 rpm | 51 kW |
Maximum Torque | 235 Nm @ 1625 |
Displacement | 3.3 L |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 70 L/min |
High-Flow Auxiliary Hydraulics - Option | 119 L/min |
Reservoir Capacity | 30.3 L |
Electrical System |
|
Battery | 950 CCA |
Starter | 3.0 kW |
Alternator | 95-amp |
Capacities/Weights |
|
Rated Operating CapacityB | 862 kg |
Rated Operating Capacity with Optional CounterweightB | 957 kg |
Fuel Tank | 62.5 L |
Travel Speed - Maximum | 12.1 km/hr |
Travel Speed with Two-Speed Option - Maximum | 20.1 km/hr |
Operating WeightC - Approximate | 3121 kg |
Control Patterns |
|
---|---|
Gehl T-Bar Controls - Servo | Optional |
Hand/Foot Controls - Pilot | Optional |
Joystick Controls - Pilot | Optional |
Dual-Hand Controls Available | Optional |
Engine |
|
Engine Auto-Shutdown System | Standard |
Engine Block Heater | Optional |
Turbocharged Engine | |
Hydraulics |
|
Auxiliary Hydraulics | Standard |
High-Flow Auxiliary Hydraulics | Optional |
Independent Hydraulic Reservoir | Standard |
Operator Station |
|
Adjustable Arm Rests/Control Towers | Standard |
Heating | Optional |
Air-Conditioning | Optional |
Suspension Seat - Mechanical | Optional |
Air Ride Seat | Optional |
Cab Enclosure | Optional |
Foot and Hand Throttles | Standard |
Full Instrumentation | Standard |
Horn | Standard |
Integral Access Plate (Removable) | Standard |
Operator Restraint Bar | Standard |
ROPS/FOPS Level II Overhead Guard | Standard |
Sound Reduction Material | Standard |
Work Lights - Front and Rear | Standard |
Performance |
|
All-Tach® Attachment Mounting System | Standard |
Power-A-Tach® Attachment Mounting System | Optional |
Anti-Vandalism Protection | Standard |
Back-Up Alarm | Optional |
Parking Brake | Standard |
Counterweight | Optional |
Hydraglide™ Ride Control | Optional |
Hydraloc™ Safety System | Standard |
Hydrostatic Drive - Servo | Standard |
Lift Arm Support Device | Standard |
Self-Leveling Lift Action | Optional |
Two-Speed Drive | Optional |