Global-CE >
Skid Steer Loader >
Mustang Manitou Skid Steer Loader >
Mustang Manitou 1900R Skid Loaders
Mustang Manitou 1900R Skid Loaders
Lift Height:
120.5" (3061)
Capacity:
1900lbs. (862)
Power:
68.4 hp (51) @ 2500
Product Feature
- Large Level II ROPS/FOPS is standard equipment.
- New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
- Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment.
- Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
- Auxiliary controls are located on the control grip in all control configurations for easy access.
- Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
- Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
- New upper-left and upper-right instrument panels provide easy readout and switch access.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
- The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
- The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
- Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
- Impressive breakout forces deliver optimal digging and lifting performance.
- Improved cycle times increase productivity on the jobsite.
- Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
- HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
- Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
- Between the tire design keeps the machine length short and compact.
- Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
- ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
- Drive chains and axle bearings are sealed systems that require no maintenance.
- All high-rotation pins have grease points for ease of maintenance.
- Features such as the remote oil drain and filter provide simple and easy maintenance access.
Product Parameter
| Dimensions | |
| A. Overall Operating Height - Fully Raised (mm) | 158" (4013) |
| B. Height to Hinge Pin - Fully Raised (mm) | 120.5" (3061) |
| C. Overall Height to top of ROPS (mm) | 80" (2032) |
| D. Ground Clearance to Chassis (mm) | 6.5" (165) |
| E. Overall Length with 66" Bucket (mm) | 127" (3226) |
| F. Overall Length without Bucket (mm) | 94" (2388) |
| G. Wheelbase (mm) | 42" (1067) |
| H. Dump Reach at Full Height (mm) | 22.5" (572) |
| I. Rollback at Ground Level | 26° |
| J. Dump Angle | 42° |
| K. Overall Width (mm) | 66.5" (1689) |
| Overall Width - Narrow Offset Tire Option | 64.5" (1638) |
| L. Bucket Width (mm) | 66" (1676) |
| M. Clearance Circle - Rear (mm) | 58.5" (1486) |
| N. Clearance Circle - Front w/o Bucket (mm) | 44.5" (1130) |
| O. Clearance Circle - Front w/Bucket (mm) | 79" (2007) |
| P. Seat to Ground Height (mm) | 39" (991) |
| Q. Rollback at Full Height | 96° |
| R. Dump Height (mm) | 91" (2311) |
| S. Departure Angle | 25° |
| Standard Tire Size | 10.00 x 16.5 HD |
| Engine | |
| Make | Yanmar |
| Model | 4TNV98C Tier IV |
| Gross Power (kW) @ 2500 rpm | 69.3 (51.7) |
| Net Power (kW) @ 2500 rpm | 68.4 hp (51) |
| Maximum Torque (Nm) @ 1625 rpm | 173 ft.-lbs. (235) |
| Displacement (L) | 202.6 cu.in. (3.3) |
| Hydraulics | |
| Auxiliary Hydraulics - Standard (L/min) | 18.5 gpm (70) |
| High-Flow Hydraulics - Optional (L/min) | 31.5 gpm (119) |
| Reservoir Capacity (L) | 8 gal. (30.3) |
| Electrical | |
| Battery (CCA) | 12-volt (950) |
| Starter (kW) | 12-volt (3.0) |
| Alternator | 95-amp |
| Capacities/Weight | |
| Rated Operating Capacity (kg) | 1900 lbs. (862) |
| With optional counterweight (kg) | 2110 lbs. (957) |
| Fuel Tank (L) | 16.5 gal. (62.5) |
| Travel Speed - Maximum (km/hr) | 12.5 mph (20.1) |
| Operating Weight - Approximate (kg) | 6854 lbs. (3109) |
