Products Center
More Products
Global-CE > Skid Steer Loader > Mustang Manitou Skid Steer Loader > Mustang Manitou 1900R Skid Loaders
Mustang Manitou 1900R Skid Loaders

Mustang Manitou 1900R Skid Loaders

Lift Height:
120.5" (3061)
Capacity:
1900lbs. (862)
Power:
68.4 hp (51) @ 2500
View Complete Details

Product Feature

  • Large Level II ROPS/FOPS is standard equipment.
  • New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
  • Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment.
  • Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
  • Auxiliary controls are located on the control grip in all control configurations for easy access.
  • Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
  • Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
  • The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
  • The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
  • Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
  • Impressive breakout forces deliver optimal digging and lifting performance.
  • Improved cycle times increase productivity on the jobsite.
  • Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
  • HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
  • Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
  • Between the tire design keeps the machine length short and compact.
  • Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
  • ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • All high-rotation pins have grease points for ease of maintenance.
  • Features such as the remote oil drain and filter provide simple and easy maintenance access.

Product Parameter

Dimensions
A. Overall Operating Height - Fully Raised (mm) 158" (4013)
B. Height to Hinge Pin - Fully Raised (mm) 120.5" (3061)
C. Overall Height to top of ROPS (mm) 80" (2032)
D. Ground Clearance to Chassis (mm) 6.5" (165)
E. Overall Length with 66" Bucket (mm) 127" (3226)
F. Overall Length without Bucket (mm) 94" (2388)
G. Wheelbase (mm) 42" (1067)
H. Dump Reach at Full Height (mm) 22.5" (572)
I. Rollback at Ground Level 26°
J. Dump Angle 42°
K. Overall Width (mm) 66.5" (1689)
Overall Width - Narrow Offset Tire Option 64.5" (1638)
L. Bucket Width (mm) 66" (1676)
M. Clearance Circle - Rear (mm) 58.5" (1486)
N. Clearance Circle - Front w/o Bucket (mm) 44.5" (1130)
O. Clearance Circle - Front w/Bucket (mm) 79" (2007)
P. Seat to Ground Height (mm) 39" (991)
Q. Rollback at Full Height 96°
R. Dump Height (mm) 91" (2311)
S. Departure Angle 25°
Standard Tire Size 10.00 x 16.5 HD
Engine
Make Yanmar
Model 4TNV98C Tier IV
Gross Power (kW) @ 2500 rpm 69.3 (51.7)
Net Power (kW) @ 2500 rpm     68.4 hp (51)
Maximum Torque (Nm) @ 1625 rpm 173 ft.-lbs. (235)
Displacement (L) 202.6 cu.in. (3.3)
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 18.5 gpm (70)
High-Flow Hydraulics - Optional (L/min) 31.5 gpm (119)
Reservoir Capacity (L) 8 gal. (30.3)
Electrical
Battery (CCA) 12-volt (950)
Starter (kW) 12-volt (3.0)
Alternator 95-amp
Capacities/Weight
Rated Operating Capacity (kg) 1900 lbs. (862)
With optional counterweight (kg) 2110 lbs. (957)
Fuel Tank (L) 16.5 gal. (62.5)
Travel Speed - Maximum (km/hr) 12.5 mph (20.1)
Operating Weight - Approximate (kg) 6854 lbs. (3109)

Send Inquiry

Connect with Mustang Manitou
I want quotes for
Email ID
Your Country is
Please select
Name
Phone Number
- -
SUBMIT
Connect with Mustang Manitou
I want quotes for
Email ID
Your Country is
Please select
Name
Phone Number
- -
SUBMIT

Related products that may lnterest you

Skid Steer Loader related brands

Copyright Notice © 2002-2024 global-ce.com