SANY STC200-IR2 Mobile Crane
Product Feature
STC200-IR2 truck crane for right hand driving adopts triple gear pump, load feedback and constant power control to provide strong lifting capacity and good micro-mobility. Unique steering buffer design guarantees smooth braking operation.
Powerful Lifting Capacity
STC200-IR2 20 ton crane is equipped with four-section boom of high strength steel structure and optimized sexangle cross section with max.lifting capacity of 20t, full-extended boom length of 33m, max.lifting height including jib of 41.5m, reduce weight and improve safety significantly.
Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.
Excellent Traveling Performance
Double-axle drive is applied to provide good mobility. Trafficability and comfortableness under the complex road condition is improved with reliable traveling performance;
Engine has the multimode power output function, which reduces power consumption.
Intelligent Electronic Control
Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.
The Load Moment Limiter
Equipped with the comprehensive intelligent protection system is used with accuracy within 3%. The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation.
More Safe Devices
Main and auxiliary winches are equipped with over roll-out limiter to prevent over rolling-out of wire rope.
Boom and jib ends are equipped with height limiters respectively to prevent over-hoisting of wire rope.
Hydraulic system is configured with the balance valve, overflow valve and two-way hydraulic lock etc., to ensure stable and reliable operation.
Product Parameter
Max. lifting capacity | 20t |
Overall length | 12490mm |
Overall width | 2500mm |
Overall height | 3800mm |
Axles | 3 |
Axle distance-1,2 | 4225mm |
Axle distance-2,3 | 1350mm |
Overall weight | 26400kg |
Front axle load | 6850kg |
Rear axle load | 19550kg |
Model | Cummins |
Rated power | 213kw/2100rpm |
Rated torque | 1050N·m/1200~1400rpm |
Emission standard | Euro Ⅲ |
Max. traveling speed | 80 km/h |
Min.turning radius | 10 m |
Min. ground clearance | 220mm |
Approach angle | 18 ° |
Departure angle | 11 ° |
Max. gradeability | 35% |
Fuel consumption per 100km | ≤ 35L |
Min.lifting radius | 3m |
Tail swing radius of superstructure | 3m |
Boom section | 4 |
Boom shape | Hexagonal |
Max. lifting moment-Base boom | 860kN·m |
Max. lifting moment-Full-extend boom | 470kN·m |
Max. lifting moment-Full-extend boom+jib | 313kN·m |
Length-Base boom | 10.6m |
Length-Full-extend boom | 33m |
Length-Full-extend boom+jib | 41.5m |
Outrigger span(Longitudinal/Transversal) | 5.1m × 6m |
Max. single rope lifting speed of main winch(no load) | 110m/min |
Max. single rope lifting speed of auxiliary winch(no load) | 110m/min |
Full extend/retract time of boom | 60 / 40s |
Full raise/lower time of boom | 60 / 50s |
Swing speed | 0~2 r/min |
HVAC in up cab | Cooling |
HVAC in low cab | Cooling and Heating |