SANY STC550 Mobile Crane
Product Feature
Sany STC550 truck crane is equipped with more safety devices. Main and auxiliary winches are equipped with over roll-out limiter to prevent over rolling-out of wire rope. Boom and jib ends are equipped with height limiters respectively to prevent over-hoisting of wire rope.
Powerful Lifting Capacity
The 55 ton truck crane has five-section boom of high strength steel structure and optimized U-shaped cross section with max.lifting capacity of 55t, full-extended boom length of 43m, jib length of 16m, max.lifting height including jib of 59.2m, reduce weight and improve safety significantly.
Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.
Efficient & Unique Hydraulic System
Load feedback and constant power control is applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design is adopted to ensure stable braking operation.Hydraulic system is configured with the balance valve, overflow valve and two-way hydraulic lock etc.to ensure stable and reliable operation.
Excellent Traveling Performance
Double-axle drive is used to provide good trafficability and comfortableness under complex road condition; engine has the multimode power output function, which reduces power consumption; the use of tipping over early-warning technology provides high stable and safe operation.
Intelligent Electronic Control
Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.
The Load Moment Limiter
Equipped with the comprehensive intelligent protection system is used with accuracy within 5%. The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation.
Product Parameter
Max. lifting capacity | 55t |
Overall length | 13750mm |
Overall width | 2750mm |
Overall height | 3800mm |
Axles | 4 |
Axle distance-1,2 | 1450mm |
Axle distance-2,3 | 4000mm |
Axle distance-3,4 | 1350mm |
Overall weight | 42000kg |
Front axle load | 16000kg |
Rear axle load | 26000kg |
Model | Cummins |
Rated power | 250kw/2100rpm |
Rated torque | 1425N·m/1200rpm |
Emission standard | Euro Ⅲ |
Max. traveling speed | 85km/h |
Min.turning radius | 12m |
Min.turning radius of boom head | 14.5m |
Drive train | 8 × 4 |
Min. ground clearance | 295mm |
Approach angle | 18 ° |
Departure angle | 12 ° |
Max. gradeability | 40% |
Fuel consumption per 100km | ≤ 45L |
Temperature range | – 20 ℃ ~ + 45 ℃ |
Min.lifting radius | 3m |
Tail swing radius of superstructure | 4m |
Boom section | 5 |
Boom shape | U-shaped |
Max. lifting moment-Base boom | 1774kN·m |
Max. lifting moment-Full-extend boom | 840.8kN·m |
Max. lifting moment-Full-extend boom+jib | 318kN·m |
Length-Base boom | 11.5m |
Length-Full-extend boom | 43m |
Length-Full-extend boom+jib | 59m |
Outrigger span(Longitudinal/Transversal) | 6×7.2m |
Jib offset | 0 ° 15 ° 30 ° |
Max. single rope lifting speed of main winch(no load) | 130 m/min |
Max. single rope lifting speed of auxiliary winch(no load) | 130 m/min |
Full extend/retract time of boom | 100 / 120s |
Full raise/lower time of boom | 80 / 80s |
Swing speed | 0~2 r/min |
HVAC in up cab | Cooling |
HVAC in low cab | Cooling and Heating |