Engine
|
Engine model |
Cat® C27 ACERT™ |
Rated engine speed |
2000.0 turn/Minutes |
Total power - SAE J1995 |
615.0 kW |
Net power - SAE J1349 |
584.0 kW |
Net power - 80/1269/EEC |
590.0 kW |
Net power - ISO 9249 |
590.0 kW |
Cylinder bore |
137.0 mm |
Stroke |
152.0 mm |
Displacement |
27.0 l |
Net Torque |
3896.0 N·m |
Engine power - ISO 14396 |
607.0 kW |
Peak torque speed |
1300.0 turn/Minutes |
Weight - Approximate value
|
Maximum Gross Vehicle Weight |
111812.0 kg |
Operating specifications
|
Nominal Payload Level(100%) |
64.6 ton (US) |
Top speed - Fully loaded |
67.6 km/h |
Payload not to be exceeded(120%)* |
77.5 ton (US) |
Maximum Operating Payload(110%) |
71.1 ton (US) |
Body capacity - SAE 2:1 |
42.23 m³ |
Gearbox
|
First gear forward |
10.8 km/h |
Second gear forward |
15.1 km/h |
Third gear forward |
20.4 km/h |
Fourth gear forward |
27.4 km/h |
Fifth gear forward |
37.0 km/h |
Sixth gear forward |
50.1 km/h |
Seventh gear forward |
67.6 km/h |
Go backwards |
14.1 km/h |
Final drive
|
Differential gear ratio |
3.64:1 |
Planetary gear ratio |
4.80:1 |
Total reduction ratio |
17.49:1 |
Brake
|
Braking area - Front brake |
655.0 cm² |
Braking area - Rear brake |
61269.0 cm² |
Brake standard |
ISO 3450:1996 |
Body lift system
|
Pump flow - High idle |
448.0 l/min |
Relief valve setting - Rise |
17250.0 kPa |
Relief valve setting - Descend |
3450.0 kPa |
Body raise time - High idle |
9.5 seconds |
Body down time - Float |
13.0 seconds |
Body power is reduced - High idle |
13.0 seconds |
Weight distribution - Approximate value
|
Front axle - No load |
50.0 % |
Front axle - Fully loaded |
34.0 % |
Rear axle - No load |
50.0 % |
Rear axle - Fully loaded |
66.0 % |
Suspension system
|
The rear axle swings |
8.1 degree |
Cylinder front stroke at no load |
234.0 mm |
Cylinder rear stroke at no load |
149.0 mm |
Maintenance refill capacity
|
Fuel tank |
795.0 l |
Cooling system |
171.0 l |
Differential and final drives |
145.0 l |
Steering tank |
36.0 l |
Steering system(Including the fuel tank) |
54.0 l |
Braking/Raise the hydraulic tank |
176.0 l |
Braking/Lifting system |
322.0 l |
Torque converter/Transmission system HRC |
70.0 l |
Torque converter/Transmission system LRC |
61.0 l |
Crankcase |
90.0 l |
Tire
|
Standard Tyre |
24.00R35(E4) |
ROPS
|
ROPS/FOPS Standard |
Standard |
Noise
|
Noise standard |
Standard |
Turn
|
Turning diameter - Front |
23.5 m |
Steering Standard |
SAE J1511 FEB94 ISO 5010:1992 |
Steering angle |
31.0 degrees |
Circle clearance diameter |
26.1 m |
Capacity – Flat bottom – 100% Fill factor
|
Stacking 2:1(SAE) |
42.2 m³ |
Paperback |
32.6 m³ |