Engine
|
Engine model |
Cat® C32 ACERT™ |
Total power - SAE J1995 |
765.0 kW |
Net power - SAE J1349 |
704.0 kW |
Net power - 80/1269/EEC |
704.0 kW |
Net power - ISO 9249 |
704.0 kW |
Cylinder bore |
146.0 mm |
Stroke |
162.0 mm |
Displacement |
32.1 l |
Net Torque |
5286.0 N·m |
Engine power - ISO 14396 |
755.0 kW |
Engine speed |
1800.0 turn/Minutes |
Peak torque speed |
1200.0 turn/Minutes |
Cylinder |
12 |
Weight - Approximation
|
Target Total Machine Weight |
164654.0 kg |
Operating specifications
|
Nominal Payload Level(100%) |
90.8 ton (US) |
Top speed - Fully loaded |
67.1 km/h |
Payload not to be exceeded(120%)* |
109.0 ton (US) |
Maximum effective load(110%) |
99.8 ton (US) |
Nominal payload(100%) |
90.8 ton (US) |
Body capacity - SAE 2:1 |
64.1 m³ |
Gearbox
|
First gear forward |
10.9 km/h |
Second gear forward |
14.8 km/h |
Third gear forward |
20.1 km/h |
Fourth gear forward |
27.2 km/h |
Fifth gear forward |
36.9 km/h |
Sixth gear forward |
49.4 km/h |
Seventh gear forward |
67.1 km/h |
Go backwards |
12.4 km/h |
Final drive
|
Differential gear ratio |
2.736:1 |
Planetary gear ratio |
7.0:1 |
Total reduction ratio |
19.1576:1 |
Brake
|
Brake standard |
ISO 3450:1996 |
Braking surface area - Rear brake |
102116.0 cm² |
Braking area - Front brake |
40846.0 cm² |
Body lift system
|
Pump flow - High idle |
458.0 l/min |
Relief valve setting - Rise |
18950.0 kPa |
Relief valve setting - Descend |
3450.0 kPa |
Body raise time - High idle |
15.0 seconds |
Body down time - Float |
13.0 seconds |
Body down time - High idle |
13.0 seconds |
Weight distribution - Approximation
|
Front axle - No load |
46.0 % |
Front axle - Fully loaded |
33.0 % |
Rear axle - No load |
54.0 % |
Rear axle - Fully loaded |
67.0 % |
Suspension system
|
The rear axle swings |
5.4 degrees |
Cylinder front stroke at no load |
74.7 mm |
Cylinder rear stroke at no load |
66.0 mm |
Maintenance refill capacity
|
Fuel tank (1) |
1136.0 l |
Cooling system |
228.0 l |
Steering system(Including the fuel tank) |
53.6 l |
Braking/Lifting system |
322.0 l |
Brake lift system(Including the fuel tank) |
444.0 l |
Torque converter/Transmission system |
138.5 l |
Differential |
227.0 l |
Crankcase |
109.0 l |
Fuel tank (2) |
1325.0 l |
Final drive(Each) |
76.0 l |
Tire
|
Standard Tyre |
27.00R49(E4) |
ROPS
|
ROPS/FOPS Standard |
Standard |
Noise
|
Noise standard |
Standard |
Turn
|
Turning diameter - Front |
25.3 m |
Steering Standard |
SAE J1511 FEB94 ISO 5010:1992 |
Steering angle |
30.5 degrees |
Circle clearance diameter |
28.4 m |
Capacity - Coal Hopper - 100% Fill factor
|
According to SAE 2:1 Stowage criteria,Loading density less than 950 kg/m3(1600 lb/yd3)When the material is |
126.0 m³ |
For material density 1040-1160 kg/m3(1750-1950 lb/yd3)Yes SAE 2:1 |
106.0 m³ |
For material density 1160 kg/m3(1950 lb/yd3)Yes SAE 2:1 |
89.0 m³ |
For material density 950-1040 kg/m3(1600-1750 lb/yd3)Yes SAE 2:1 |
110.0 m³ |
Capacity - X Type a body - 100% Fill factor
|
Stacking 2:1(SAE) |
60.2 m³ |
Paperback |
41.9 m³ |