Weight distribution - Approximation
|
| Chassis weight range |
210630-219146 kg（464359-483134 lb） |
| Total operating weight of the machine（GMW） |
623690.0 kg |
| Body weight range |
41368-61235 kg（91200-135000 lb） |
Final drive
|
| Differential gear ratio |
1.276:1 |
| Planetary gear ratio |
16.67:1 |
| Total reduction ratio |
21.26:1 |
Gearbox
|
| First gear forward |
11.3 km/h |
| Second gear forward |
15.2 km/h |
| Third gear forward |
20.5 km/h |
| Fourth gear forward |
27.7 km/h |
| Fifth gear forward |
37.2 km/h |
| Sixth gear forward |
50.3 km/h |
| Seventh gear forward |
67.6 km/h |
| Go backwards |
11.9 km/h |
Suspension system
|
| The rear axle swings |
±4.0 degrees |
| Effective cylinder stroke – Front |
313.6 mm |
| Effective cylinder stroke – Rear |
165.1 mm |
Body lift system
|
| Relief valve setting - Rise |
24200.0 kPa |
| Pump flow - High idle |
1200.0 l/min |
| Body raise time - High idle |
25.0 seconds |
| Body Down Time at High Idle - Float |
19.0 seconds |
Capacity - MSD II - 100% Fill factor
|
| Stacking（SAE 2:1） |
240-267 m3（314-350 yd3） |
| Paperback |
188-213 m3（246-290 yd3） |
Maintenance refill capacity
|
| Cooling system |
1160.0 l |
| Crankcase |
319.0 l |
| Steering tank |
254.0 l |
| Steering system（Including the fuel tank） |
355.0 l |
| Braking/Lifting system（Including the fuel tank） |
1600.0 l |
| Brake/Lift system tank |
770.0 l |
| Brake/Lifting system hydraulic circuit |
830.0 l |
| Front wheel（Each） |
61.0 l |
| Torque converter sump |
303.0 l |
| Differential |
1176.0 l |
| Fuel tank（Standard） |
3785.0 l |
| Final drive（Each side） |
185.0 l |
| Torque converter/Transmission system（Includes an oil sump） |
629.0 l |
Tire
|
| Tire |
59/80R63 - Michelin Or Bridgestone |
Size
|
| Front headliner height - No load |
7709.0 mm |
| Engine guard clearance - Fully loaded |
1025.0 mm |
| Rear axle clearance - Fully loaded |
947.0 mm |
| Ground clearance at full load |
786.0 mm |
| To ROPS The height of the top - No load |
6526.0 mm |
| Loading height - No load |
6998.0 mm |
| Maximum Inside Body Depth |
3363.0 mm |
| Overall height with body raised |
15701.0 mm |
| Overall body length |
14802.0 mm |
| Inside body length |
9976.0 mm |
| Total length |
15080.0 mm |
| Wheelbase |
7195.0 mm |
| Distance between rear axle and tail |
3944.0 mm |
| Unloading clearance |
2017.0 mm |
| Width between center lines of front tire |
6534.0 mm |
| Overall width of headliner |
9116.0 mm |
| Outside width of body |
9755.0 mm |
| Inside body width |
8513.0 mm |
| Width between center lines of rear dual tire |
6233.0 mm |
| Overall tire width |
9529.0 mm |
ROPS
|
| ROPS Standard |
ISO 3471-1994 |
Noise
|
| Noise standard |
SAE J919:1995、ANSI/SAE J166:2008、ISO 6394:2008、ISO 6396:2008、ISO 6393:2008、ISO 6395:2008、SAW J88:2006 |
Turn
|
| Steering Standard |
SAE J1511 OCT90、ISO 5010:1992 |
Brake
|
| Outside diameter |
1067.0 mm |
| Standard |
J-ISO 3450 JAN88、ISO 3450-1996 |
| Number of brake pads per side - Front |
10.0 |
| Number of brake pads per side - Rear |
15.0 |
| Braking surface |
330517.0 cm² |
Engine
|
| Engine model |
Cat C175-20 |
| Total power - SAE J1995 |
2983.0 kW |
| Cylinder bore |
175.0 mm |
| Stroke |
220.0 mm |
| Displacement |
106.0 l |
| Net power |
2828.0 kg/mm |
| Net power - SAE J1349 |
2828.0 kg/mm |
Operating specifications
|
| Nominal payload capacity |
363.0 ton (US) |
| Steering angle |
40.0 degrees |
| Circle clearance diameter |
42.0 m |
| Stacking SAE（2:1）Capacity |
240-267 m3 （314-350 yd3） |
| Top speed - Fully loaded |
67.6 km/h |
| Minimum turning diameter of machine |
42.0 m |
Approximate weight - MSD II
|
| Front axle - Fully loaded |
33.3 % |
| Front axle - No load |
47.2 % |
| Rear axle - Fully loaded |
66.7 % |
| Rear axle - No load |
52.8 % |
