Hitachi Construction / Production Excavator ZX380LC-6
Product Feature
Engine
The Isuzu EPA Final Tier 4 (FT4)/EU Stage IV engine delivers fuel-efficient and reliable performance. Fuel pressure, timing, and volume are precisely regulated by electronic control for efficient combustion with Isuzu’s common-rail fuel injection system.
The pressurized fuel system improves fuel injector operation, and the fuel recirculation system helps prevent fuel gelling in cold climates – so you can maintain maximum productivity.
Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.
Durable structure and undercarriage
Thick-plate, single-sheet mainframe, box-section track frames and industry-exclusive, double-seal swing bearing deliver rock-solid durability.
With large idlers, rollers, and strutted track links, the sealed and lubricated undercarriage is built for the long haul.
Reinforced D-channel side frames provide maximum cab and component impact protection.
Tungsten-carbide coated wear surfaces protect the critical bucket-to-arm joint.
Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.
Hydraulics
Stay on schedule with generous swing torque, digging force, and lift capacity
Simple controls
Multi-language LCD monitor and rotary dial provide intuitive access to machine info and functions. Just turn and tap to select work modes, monitor maintenance intervals, check diagnostic codes, and set cab temperature. Control oil flow and toggle between dig and thumb modes with a programmable thumb attachment mode.
Ergonomically correct short-throw pilot levers provide smooth, precise control with less effort. Pushbuttons in the right lever allow control of auxiliary hydraulic flow for attachments. Optional sliding switch provides proportional speed control, giving you full command from your fingertips.
It’s not always about brute force. Unmatched metering and smooth multifunction operation provide plenty of finesse and precision, too.
Comfortable cab
Optional cab and right-side boom lights provide extra illumination to extend your production.
Get unobstructed all-around visibility thanks to a new hood design paired with a wide expanse of front, side, and overhead glass and mirrors.
Operators get maximum support from a sculpted mechanical suspension high-back seat. Seat has 318 mm (12.5 in.) of travel, sliding together or independent of the joystick console. For even more comfort, opt for the air-suspension heated seat.
Automatic, high-velocity, bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear, the cab comfortable and the operator productive.
Easy to maintain
Centralized lube banks place zerks within easy reach, making greasing less messy and time consuming.
Engine oil, fuel, and hydraulic pilot oil filters are all located on the same side at ground level for easy servicing.
Upper-structure handrails provide added safety when servicing the engine compartment, and a larger hood gives you better engine accessibility.
Our field-proven technology is simple and efficient, employing cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR). An improved piston design allows particulate matter to be burned in cylinder, so there’s no need for a diesel particulate filter (DPF).
A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.
The FT4 engine solution does not require a diesel particulate filter (DPF), saving service time and lowering operating costs.
ZXLink™
The ZX380LC-6 is standard equipped with Hitachi’s ZXLink™ system, giving you the power to optimize your operation and maximize your profits. With the support of your dealer you can use your data to reduce idling time as well as maximize productivity and uptime. Without ever leaving your seat you’ll have access to fleet location, functions, hours, fuel consumption, alerts and other essential machine data. You can also view location and alert information in the field from your iOS or Android devices.
Product Parameter
Emission Rating | Tier 4 |
Number Of Cylinders (Per Engine) | 6 |
Displacement | 7.8 ltr 475 Inches³ |
Rated speed | 1900 rpm |
Engine Output - Net | 202 kW 271 hp |
Number Of Carrier Rollers - Each Side | 2 |
Number Of Track Rollers - Each Side | 8 |
Track Shoe Width | 800 mm 32 inches |
Transport Length Mono Boom | 11290 mm 37 ft ft/in |
Transport Height - Maximum | 3600 mm 11 ft 10 in ft/in |
Overall Undercarriage Width | 3390 mm 11 ft 2 in ft/in |
Track Length On Ground | 4050 mm 13 ft 3 in ft/in |
Undercarriage Overall Length | 4940 mm 16 ft 2 in ft/in |
Tailswing Radius | 3600 mm 11 ft 10 in ft/in |
Ground Clearance | 510 mm 20 inches |
Width over standard tracks | 3390 mm 11 ft 2 in ft/in |
Track Gauge | 2590 mm 8 ft 6 in ft/in |
Digging Reach - Mono Boom | 11860 mm 38 ft 11 in ft/in |
Ground Level Reach - Mono Boom | 11670 mm 38 ft 3 in ft/in |
Dig Height - Mono Boom | 10750 mm 35 ft 3 in ft/in |
Dump Height - Mono Boom | 7630 mm 25 ft ft/in |
Dig depth - 2.44m / 8'ft flat bottom | 8040 mm 26 ft 5 in ft/in |
Dig Depth - Mono Boom | 8180 mm 26 ft 10 in ft/in |
Fuel Tank | 630 ltr 166 gallons (US) |
Hydraulic Tank | 180 ltr 48 gallons (US) |
Ground Bearing Pressure | 52.5 kPa 7.61 PSI |
Dipper Tearout | 159 kN 35745 lbf |
Operating Weight | 37320 kg 82276 lbs |